Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Nacecare AVB4X
- Page 1 USE AND MAINTENANCE INSTRUCTIONS FOR THE SELF-CONTAINED CLEANING MACHINE AVB4X READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE MACHINE 1205 Britannia Road East Mississauga, Ontario, Canada L4W IC7 Tel: 905 795 0122 Toll Free: 1 800 387 3210 Fax: 1 800 709 2896...
- Page 2 Safety Instructions (read carefully) Every electrical device must be used for its particular function only, respecting the manufacturer’s instructions. Failure to adhere to the instructions could result in serious bodily injuries to the operator (shock, electrocution, etc.). Please, read these instructions carefully and be sure to understand them before using the machine. •...
- Page 3 General Two high-density polyethylene tanks, kept together with elastic hooks, compose the body of the carpet-cleaning machine. The upper tank is meant to contain the dirty water sucked from the carpet, while the lower tank is meant to contain clean water and detergent. The lower tank also contains the vacuum motor, the pump and the control panel.
- Page 4 Preparation for Work The carpet cleaning machine AVB4X is designed to clean both large areas of carpet and hard floor. It is also possible to clean upholstery, inside of cars or hard-to-reach areas, by using additional accessories, which must be connected to the machine with connecting hoses (see paragraph Use with Accessories).
- Page 5 Insert the plug of the cable into a wall socket (see Safety Regulations). Use as a Self-contained Machine In this mode the machine washes and dries with the spray nozzle and the vacuum head, which is situated below the body of the machine. To switch on the machine you must act on the switches on the control panel: 1.
- Page 6 IMPORTANT: Before each use, it is necessary to regulate the pressure of the rotating brush. Pull the dedicated knob and rotate, in order to regulate the pressure of brush on the hard floor or carpet surface. If the brush is too aggressive on the carpet or hard floor surface, the motor may be overloaded and the thermal protection will intervene, to avoid damage to the brush motor.
- Page 7 By doing so, the AVB4X becomes a classical carpet extractor. At this point it is possible to connect the accessories to the machine, through the special connecting hoses.
- Page 8 Maintenance In order to ensure your machine has a long life, follow these helpful hints: 1. After every use, before storing the machine, remove all the water from the solution and the recovery tank. Put some liters of clean (chemical free) water into the solution tank and use the pump only, pressing the lever of the solution valve.
Need help?
Do you have a question about the AVB4X and is the answer not in the manual?
Questions and answers