Summary of Contents for Flash Technology PAPI
- Page 1 Handheld Controller – PAPI USER MANUAL Technical Support: Email: customerservice@flashtechnology.com Toll Free: 1.800.821.5825 Fax: 1.615.261.2600 Web: flashtechnology.com/airfield ©2019 Flash Technology, LLC...
-
Page 2: Table Of Contents
Handheld Controller – PAPI USER MANUAL Contents Safety & Usage ..............................3 Battery Precautions ............................3 Wireless Precautions ............................3 Regulatory ..............................4 Warranty Disclaimer ............................4 Introduction ..............................5 Features ................................. 5 Applications ..............................5 Operation ................................6 Theory of Operation............................6 Features ................................. -
Page 3: Safety & Usage
Handheld Controller – PAPI USER MANUAL Safety & Usage The following symbols indicate important safety warnings and precautions throughout this manual: WARNING indicates that serious bodily harm or death may result from failure to adhere to the precautions. CAUTION indicates that damage to equipment may result if the instructions are not followed. -
Page 4: Regulatory
Handheld Controller – PAPI USER MANUAL Regulatory This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. -
Page 5: Introduction
PAPI: Indicator product (PAPI-253C). Refer to 47125 Handheld Controller User Manual for complete instructions on using the Flash Handheld Controller with other Flash products. Refer to LG-TM-253C-01, Technical Manual for Laser Guidance PAPI-253C operation. ©2019 Flash Technology, LLC Page 5... -
Page 6: Operation
Handheld Controller – PAPI USER MANUAL Operation Theory of Operation The Handheld Controller contains a 900 MHz radio that transmits commands to a receiving radio inside the controlled product. The controlled product operates in one of several modes detailed in Section 3.3. - Page 7 In this way, you can add to a group as you go without having to re-assign all products in that group. Due to the critical importance of the PAPI as a navigation aid, it is recommended the PAPI be controlled on a separate group from the rest of the airfield lights.
-
Page 8: Modes
Press AUTO HIGH IR FLASH ENTER INFRARED (Flash not supported) In AUTO modes, the PAPI will stay in the desired mode until a LIGHTS OFF command is sent from the Handheld Controller. The PAPI does not time out, monitor battery states or check for ambient brightness condition. - Page 9 The Temporary Mode setting is selected by the Handheld Controller: The PAPI does not respond to TEMP commands to turn on the device. The PAPI will change modes if already enabled in an AUTO MODE and a TEMP command is received.
-
Page 10: Troubleshooting
Handheld Controller – PAPI USER MANUAL Troubleshooting Symptom Cause Solution Controlled product’s Controlled product’s infrared output mode De-select the IR key on the Handheld output is off is selected on Controller; send a visible output command Controlled product is unresponsive to wireless Controlled product’s battery is not...