Summit Treestands Summit Instruction Booklet

Harness

Advertisement

Please read carefully BEFORE using your new Summit Safety Harness.
Congratulations! You have purchased the finest commercially available hunting harness on the market today. Summit Harnesses are designed and built to
provide years of trouble-free, successful hunting with a minimum of maintenance and care. They are certified to meet the requirements of the Treestand
Manufacturers Association (TMA) Standards. This booklet is provided to you to outline the recommended use, care and maintenance of your Summit Safety
Harness.
WARNING
!
You must fully read, understand and follow these warnings,
expiration date and instructions! Failure to follow these
instructions may cause serious injury or death!!
AFTER 5 (FIVE) YEARS FROM MANUFACTURE DATE (LOCATED ON HARNESS WARNING LABEL).
THE SAFETY STRAP / HARNESS HAS BEEN SUBJECTED TO SEVERE SHOCK LOADING.
THE SAFETY STRAP / HARNESS HAS BEEN SUBJECTED TO THE KIND OF OVERLOAD FOR WHICH IT
WAS NOT DESIGNED, SUCH AS TOWING A VEHICLE.
THE SAFETY STRAP / HARNESS SHOWS SIGNS OF FRAYING FROM SUBSTANTIAL USE.
THE SAFETY STRAP / HARNESS WAS USED IN PREVENTING A FALL.
BEFORE USING ANY TREESTAND, BE SURE YOU MAINTAIN FULL BODY SAFETY HARNESS ATTACHMENT TO THE TREE AT ALL TIMES
AFTER LEAVING THE GROUND!!!
READ AND UNDERSTAND THE MANUFACTURER'S WARNINGS, EXPIRATION DATE AND INSTRUCTIONS ON HOW TO USE AND HOW TO
PROPERLY ADJUST THE HARNESS.
PRACTICE THE USE OF A FULL BODY HARNESS AT GROUND LEVEL IN THE PRESENCE OF A RESPONSIBLE ADULT TO EXPERIENCE THE
FEELING OF HANGING SUSPENDED BEFORE USING IN A HUNTING ENVIRONMENT.
THE LENGTH OF THE HARNESS TETHER MUST BE MINIMIZED AT ALL TIMES. IT SHOULD BE ADJUSTED SO THAT IT IS ABOVE THE HEAD
WITH NO SLACK (SNUG) IN THE SITTING POSITION AND YOU SHOULD HAVE THE MINIMUM AMOUNT OF SLACK POSSIBLE WHEN
CLIMBING.
A FALL CAN OCCUR AT ANY TIME AFTER LEAVING THE GROUND! IF THE HUNTING LOCATION IS UNKNOWN BY ANYONE AND
COMMUNICATION EFFORTS ARE UNSUCCESSFUL, YOU MUST HAVE A PERSONAL PLAN FOR RECOVERY/ESCAPE BECAUSE PROLONGED
SUSPENSION IN A HARNESS CAN BE FATAL. IT IS IMPORTANT TO EXERCISE THE LEGS BY PUSHING AGAINST THE TREE OR DOING
OTHER FORMS OF CONTINUOUS LEG EXERCISES TO AVOID BLOOD POOLING WHILE BEING SUSPENDED. HUNTERS WITH VARYING
DEGREES OF PHYSICAL FITNESS MAY REQUIRE DIFFERENT PLANS TO RECOVER/ESCAPE THE EFFECTS OF PROLONGED SUSPENSION.
HAVE A PERSONAL PLAN AND PRACTICE IT IN THE PRESENCE OF A RESPONSIBLE ADULT BEFORE LEAVING THE GROUND. NO ONE
ESCAPE/RESCUE PLAN WILL WORK FOR EVERY HUNTER ON EVERY TREE IN EVERY CIRCUMSTANCE. ONLY YOU CAN DETERMINE THE BEST
RECOVERY/ESCAPE PLAN FOR YOUR HUNTING SITUATION AND YOU MUST HAVE A RECOVERY/ESCAPE PLAN FOR YOUR SITUATION
BEFORE LEAVING THE GROUND.
HUNT FROM THE GROUND WHEN SELF-RECOVERY/ESCAPE ABILITY IS ABSENT.
IN THE EVENT OF A FALL - DON'T PANIC!! - THERE IS TIME TO MAKE A CORRECT DECISION ON WHAT ACTION TO TAKE IF A FALL
OCCURS WHILE WEARING A FULL BODY HARNESS.
IF YOU HAVE ANY QUESTIONS ABOUT THIS FALL ARREST SYSTEM OR ITS USE, CALL OR
Summit Harness
Instruction Booklet - 2008
WHEN TO REPLACE YOUR SAFETY STRAP / HARNESS:
E-MAIL US BEFORE USE!
(256) 353-0634 -- WWW.SUMMITSTANDS.COM
Summit Harness [83054] - 2008 Instructions - PN 10894
You MUST also view the enclosed DVD
BEFORE using your new treestand!!
WEIGHT LIMIT: 300 LBS.
GOLIATH / 180 MAX / TITAN
WEIGHT LIMIT: 350LBS.
DO NOT EXCEED THIS LIMIT!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Summit and is the answer not in the manual?

Questions and answers

Summary of Contents for Summit Treestands Summit

  • Page 1 They are certified to meet the requirements of the Treestand Manufacturers Association (TMA) Standards. This booklet is provided to you to outline the recommended use, care and maintenance of your Summit Safety Harness.
  • Page 2 Summit Treestands, LLC. WARNING If you fall, you must replace the harness by contacting Summit Treestands, LLC. This harness has been designed to be used only as a safety device for hunting from elevated treestands and ladder stands. Any other use is PROHIBITED!
  • Page 3 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Part 2. Attaching the Treestand Safety Strap to the Tree. Harness Tether Loop WARNING When attaching the treestand safety strap to the tree, be sure the free end is fed completely through the tether loop on the harness as shown in Figure 13.
  • Page 4 Step 1. Insert the sewn end of the strap through one of the loops on the Summit Harness belt as shown in Figure 21. Step 2. Bring the strap around your back and thread it through the other loop on the Harness belt.
  • Page 5 It is expressly understood that Summit’s liability for its products, whether due to breach of warranty, negligence, strict liability, or otherwise, is limited to the repair of the product, as stated above, and Summit will not be liable for any other injury, loss, damage, or expense, whether direct or consequential, including but not limited to loss of use, income, profit, or damage to material, arising in connection with the sale, installation, use of, inability to use, or the repair or replacement of Summit’s products.
  • Page 6 Simple devices such as screw-in steps or a rope “Tree Descender” (available from Summit) will allow you to remove the weight from your harness. This may enable you to return to the treestand/ladder/climbing steps or slowly descend the tree.

Table of Contents