Huawei P Smart 2019 User Manual page 31

Turn the flash on or off: Touch
•
(Always on).
Some features are only available when using the rear camera.
3
Touch to take a photo.
Take Burst Photos
Use Burst mode to take a sequence of photos in quick succession so you can choose the best
one.
Burst shooting is only available when using the rear camera.
1
Open Camera and select Photo mode.
2
Touch and hold
When shooting, you'll see a counter, which indicates how many photos you've taken so
far.
3
Lift your finger to stop shooting.
Once you have finished, select photos you want to keep from the burst.
1
Open Gallery.
2
Touch a burst photo (which will be tagged with
3
Swipe through the burst photos, select the ones you want to keep, then touch
follow the onscreen instructions.
4
To delete the whole burst photo, touch and hold to select the photo, then touch
Take Timed Photos
The camera timer allows you to set a time delay so you can get into position after you have
touched the shutter button.
1
Open Camera.
2
Go to > Timer and select a delay option.
3
Return to the viewfinder and touch the shutter button. Your device will take a photo when
the countdown ends.
Use Audio Control to Take Photos
You can use your voice to take photos without having to touch the shutter button.
1
Open Camera.
2
Go to > Audio control, enable Audio control, and select an audio control option.
3
Go back to the viewfinder, then say your command to take a photo.
and select
or press and hold one of the Volume buttons to take a burst photo.
(Auto), (On),
), then touch .
Camera and Gallery
(Off), or
and
.
28