Advertisement
5.- FITTING THE PEDALS
To fit the pedals correctly, you must position them the correct way around and screw them on in the right direction:
i
Stickers indicate the left and right pedal. If these have dropped off, look at the end of the thread where it is imprinted.
ii
The correct pedal needs to be attached to the matching side of the bike i.e. left pedal to left side and right pedal to right side.
iii
IMPORTANT! Pedals need screwing in opposite directions so they don't fall off in use.
Left pedal is screwed in anti-clockwise / Right pedal is screwed in clockwise. Tighten pedals with spanner provided.
i
THREADS
L
R
PLEASE MAKE SURE YOU FIT THE CORRECT PEDAL TO THE CORRECT SIDE. FAILURE TO DO SO MAY RESULT
IN CROSS-THREADING, WHICH CAN CAUSE IRREPARABLE DAMAGE NOT COVERED BY WARANTY
ii
L
LEFT
iii
R
SCREW ANTI CLOCKWISE
TOOLS NEEDED
SPANNER
RIGHT
SCREW CLOCKWISE
9
Advertisement
