Table of Contents
Advertisement
Quick Links
radii xpert
Professional LED Curing Light
Smarter design.
Optimal cure every time.
Instructions For Use
Please read these instructions before operating this unit
Product description
Thank you for purchasing the Radii Xpert LED curing light. The Radii Xpert is a high performance light source for the intraoral polymerization of
light-cured materials with photoiniator(s) in the wavelength range of 440 nm - 480 nm (standard curing tip). It has been designed to consistently
produce optimum polymerization for all light-cured materials in order to produce high-quality restorations.
Target assist technology, a special low power light, has been incorporated into the Radii Xpert to assist users to accurately position the curing tip
before polymerization begins.
The Radii Xpert is a high quality medical device which has been designed in accordance to the latest science and technology for curing lights.
Each unit comes with an international power supply and is suitable for power outlets from 100 - 240 Volts.
Your
Smile.
www.sdi.com.au
Our
Vision.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SDI radii xpert
Summary of Contents for SDI radii xpert
- Page 1 Product description Thank you for purchasing the Radii Xpert LED curing light. The Radii Xpert is a high performance light source for the intraoral polymerization of light-cured materials with photoiniator(s) in the wavelength range of 440 nm - 480 nm (standard curing tip). It has been designed to consistently produce optimum polymerization for all light-cured materials in order to produce high-quality restorations.
-
Page 2: Safety Warnings And Cautions
6. Do not use damaged power cord. 7. Should you have any reason to suspect the safety of the Radii Xpert to be compromised, the unit must be taken out of operation and appropriately labelled to prevent third parties from inadvertently using a potential defective unit. -
Page 3: Product Overview
PRODUCT OVERVIEW Rotatable Do not autoclave the LED attachment LED light attachment or any part of the Radii Xpert. CAUTION Status indicator charging (low battery) - solid red charging - pulsing green fully charged - solid green curing in progress - solid blue... -
Page 4: Quick Start-Up
Note: 1. During charging, the status ring and lights on the charging base illuminate pulsing green. 2. The Radii Xpert contains a lithium ion rechargeable battery that does not have any memory and can be recharged at any time. Operating 1. -
Page 5: Sleep Mode
SLEEP MODE The Radii Xpert will go into a sleep mode (LCD turns OFF) when it is: 1. Sitting on the charging dock or 2. Not in use for more than 3 minutes The unit will automatically wake up when removed from the charging dock. Press to start curing. -
Page 6: How To Change The Battery
Battery Life Expectancy: Battery life is dependent on the amount of use and LED efficiency. SDI Ltd guarantees the battery to have a minimum of 300 total discharges. To extend the life of your Radii Xpert battery, keep it on the charging dock at the end of each day if possible. -
Page 7: Maintenance And Cleaning
STORAGE DURING EXTENDED PERIODS OF NON-USE If the Radii Xpert is not to be used for an extended period of time, ie during holiday periods, fully charge the handpiece or keep it on the charging dock with the power ON. - Page 8 Guidance and manufacturer’s declaration - electromagnetic emissions The Radii Xpert is intended for use in the electromagnetic environment specified below. The customer or the user of the Radii Xpert should assure that it is used in such an environment. Emissions test...
- Page 9 Made in Australia by SDI Limited ACN 008 075 581 Bayswater, Victoria 3153 SDI Germany GmbH Australia 1800 337 003 Hansestrasse 85 Austria 00800 0225 5734 51149 Cologne Brazil 0800 770 1735...
- Page 12 Last revision 25-09-17 PAK41330 E...
Need help?
Do you have a question about the radii xpert and is the answer not in the manual?
Questions and answers