Advertisement
Quick Links
Advertisement
Summary of Contents for Perri CS-23IRM-MAH
- Page 1 CS-23IRM-MAH CS-23IRM-WHT ASSEMBLY, CARE & USE INSTRUCTIONS Questions, problems, missing parts? Before returning to your retailer, call our customers service department at 1-855-571-1044 8 a.m. - 8 p.m., EST, Monday-Friday. Please Keep This Manual For Future Reference...
- Page 2 PACKAGE CONTENTS HARDWARE CONTENTS (not shown actual size) Remote Control Touch-up Pen Qty. 1 Qty. 1...
-
Page 3: Important Instructions
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 4 SAFETY INFORMATION • Use this appliance only as described in the manual. Any other use is NOT recommended by the CAUTION • If possible, ALWAYS unplug this appliance when not in use. • DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions. DO NOT operate any heater if it has been dropped or damaged in any manner.
- Page 5 SAFETY INFORMATION • This heater is for use on 120 volts. The cord has a plug as shown below. See illustration for grounding instruction. An adapter as shown at C is available for connecting three-blade grounding type plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box.
- Page 6 OPERATING INSTRUCTIONS Control Panel Remote Control (AA) To use the remote the plastic tab by gently pullling it out of remote control (AA). Power Button • Pressing the power button will turn ON or OFF the unit. • When the unit is in ON mode, the power icon indicator light will be shown green. And •...
- Page 7 OPERATING INSTRUCTIONS Temperature Mode • The temperature mode controls the heater’s thermostat setting. • Use Up arrow button or Down arrow button to scroll through the pre-set temperature settings: - Fahrenheit:65,70,75,80,85,90,HI,OF - Celsius: 18,21,24,27,29,32,HI,OF • Hold down the mode button for 3 seconds to toggle between Fahrenheit and Celsius. A small “F”...
- Page 8 CARE AND MAINTENANCE • Make sure the unit is turned OFF and unplugged whenever you are cleaning the heater or • • • Tips for using touch-up pen (BB): For scratches, stroke in direction of scratch. For worn areas, stroke in the direction of wood grain. Rub excess colorant promptly with a soft cloth. bearing life and require no further lubrication.
-
Page 9: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Error E1 displayed The overheat sensor Unplug unit, wait 5-10 minutes, then the sensor will on control panel. has been engaged. reset itself. Plug the unit back in and turn on the heater. If the problem persists, call customer service. Note: The other functions will work normally. -
Page 10: Warranty
WARRANTY This item is warrantied by the manufacturer to be free of material and manufacturing defects for the time period of one year from the purchase date. This is subject to the following limitations and conditions: This mantel must be installed and operated in accordance with the installation instructions that were provided with the product. - Page 11 REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-571-1044, 8 a.m. - 8 p.m., EST, Monday - Friday. PART DESCRIPTION PART# Remote Control SP2320PB-001 Touch-up Pen 1033FM-23-001 Insert Mounting Bracket (with 1033FM-23-002 screws) Thermostat SP2320PB-002 Heater/Blower SP2320PB-003 Assembly Spinner Motor...