Related Manuals for Vivid Flatbook
Summary of Contents for Vivid Flatbook
- Page 1 Product instruction manual Flatbook® Flatbook is a multifunctional cutting accessory, designed exclusively for the Matrix® & Matrix Duo® Laminating Systems. Keep this manual safe for future reference.
- Page 2 2. Move the Flatbook unit so the 3. Remove the clear safety cover. your laminating roll. centre line on the Flatbook is in line with the mark on your film. 4. Place removed cover on the rear of 5. Pull out the locking device and 6.
- Page 3 Removing the Flatbook Blade. 1. Place Flatbook onto a flat surface 2. To remove blades simply unscrew 3. Take out the lock in washer and and remove clear safety cover.
- Page 4 Cutting film to a bespoke size. 1. Remove perforator and blade 2. Mark out how much film is required. 3. Line up Flatbook head ensuring that the cutting line is corresponding to the newly marked film. 4. Run laminator with practice sheets 5.
- Page 5 1. To perforate remove all blades apart 2. This will help you to separate from the perforator then position on difficult/specialist films. the edge of your film. Assembling the Flatbook for use with the Matrix Duo® Parts Required Sliding Rod Support End black handle Support Arm...
-
Page 6: Warranty & Incorrect Use
The warranty does not cover against any damages caused by operator misuse. Your warranty will be void if the System has been modified by a third party not approved by the manufacturer (Vivid Laminating Technologies) to carry out such alterations.
Need help?
Do you have a question about the Flatbook and is the answer not in the manual?
Questions and answers