Download Print this page

Alpin PWE-S8-WRA Manual

Compact subwoofer for jeep wrangler unlimited

Advertisement

Quick Links

PWE-S8-WRA
Compact Subwoofer for Jeep
˜ Model: Wrangler Unlimited
˜ Model Year: 2011-UP
˜ For Drivers Seat Installation
Only
˜ Not compatible with factory
equipped subwoofer system.
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, disconnect the negative (-) terminal from the
battery for 3 minutes before continuing. Failure to do so can lead to electric shock,
injury or damage to equipment.
Introduction
˜ Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
˜ The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
˜ Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
˜ This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Ignoring the content marked by this indication and using the product incorrectly is
Warning
expected to lead to death or serious injury.
Ignoring the content marked by this indication and using the product incorrectly is only
Caution
expected to lead to injury or property damage.
Wrangler Unlimited
Jeep
˜ 1/10

Advertisement

loading
Need help?

Need help?

Do you have a question about the PWE-S8-WRA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alpin PWE-S8-WRA

  • Page 1 Jeep Wrangler Unlimited ˜ 1/10 PWE-S8-WRA Compact Subwoofer for Jeep ˜ Model: Wrangler Unlimited ˜ Model Year: 2011-UP ˜ For Drivers Seat Installation Only ˜ Not compatible with factory equipped subwoofer system. * The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is not guaranteed if the manufacturer has made production changes to the listed vehicles above.
  • Page 2 Jeep Wrangler Unlimited ˜ 2/10 Types of Precautions Indicates actions that are forbidden Indicates actions that are (must not be performed) mandatory (must be performed) Forbidden Mandatory Indicates that disassembly is Marks content that should receive forbidden. your full attention. Forbidden Warning Do not disassemble or modify the product.
  • Page 3 Jeep Wrangler Unlimited ˜ 3/10 When installing and grounding the product, do not use any of the bolts or nuts of the steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working or lead to fire. Forbidden Do not install the product near the passenger-side airbag.
  • Page 4 Jeep Wrangler Unlimited ˜ 4/10 Tools Required Panel Removing Tool 7mm, 10mm, 18mm Socket #2 Phillips Screwdriver T30, T45 Torx bit 9/32” Drill Bit Drill Rachet Extension Accessory List Bracket (A) Bracket (B) Cable Ties (x15) M4 Screw set (x8) M6 screw set (x4)
  • Page 5 Jeep Wrangler Unlimited ˜ 5/10 Accessory List PWE-S8 Bass Level Control Velcro Spare Fuse ( 15A ) PWE-S8-WRA Harness Radio T-Harness...
  • Page 6 Jeep Wrangler Unlimited ˜ 6/10 Factory Unit Disassembly Process Remove the rubber cover from the top center Remove the dash panel. storage area and extract (1) 7mm screw. Remove the knee cover panel and extract (2) 7mm Extract (4) 7 mm screws and remove the factory screws located to the right and left sides of the radio.
  • Page 7 Jeep Wrangler Unlimited ˜ 7/10 Drivers Seat Removal Using an 18mm socket, extract the 4 seat bolts Tilt the drivers seat backwards to locate the two from the Drivers seat. connectors. Front Verify that the negative (-) terminal has been disconnected before continuing.
  • Page 8 Wrangler Unlimited ˜ 8/10 Use a #2 Philips screw driver to attach the mounting Installation of the PWE-S8-WRA brackets to the PWE-S8 with the M4 screws. Position the seat in a secure manner to gain access to the bottom of the seat.
  • Page 9: Harness Installation

    Wrangler Unlimited ˜ 9/10 Harness Installation Bass Level Control Installation Route the PWE-S8-WRA harness from the radio Mount the bass level control to an easily accessible cavity as show below. location. We recommend mounting the control on the center console as shown below using the Velcro provided.
  • Page 10 Jeep Wrangler Unlimited ˜ 10/10 Re-installing the Seats and radio AMP Settings Recommended Settings. Reinstall the seat and the seat belt anchor. Front Seat Mounting Bolts 75 Nm / 55 Ft. Lbs Seat Belt Anchor Screw 40 Nm / 30 Ft. Lbs Connect the factory plugs to the seat.