Safety Instructions - Klarstein Mini Taverna 10011294 Quick Start Manual

Thank you for purchasing our product. Please read the instruction before attempting to
operate this product. Keep this instruction manual for future reference.
 Check the voltage indicated on the rating plate.
 An individual appliance circuit from fuse box is preferable.
 Place the appliance on a flat surface and make sure the fridge is not positioned in direct sunlight.
 Do not place any object close to the unit (recommended 4" clearance from sides and back).
 Do not install this appliance in damp or wet location as this will cause condensation to collect on
the outside of the fridge and may cause damage to the insulation.
 When disconnecting the plug from the outlet, firmly hold and pull the plug itself. Do not pull on
the cord.
 Do not place your fingers or any object into the back of the appliance.
 Do not use the appliance if the cord or plug is damaged.
 Check the power cord of this appliance regularly. A damaged cord must be replaced by the
manufacturer, an after-sales service or a qualified professional in order to avoid injury and damage
to property.
 This appliance is for indoor household use only. Do not use this appliance outdoors.
 Do not tightly wind or bundle the power cord. It might overheat.
 Do not use flammable sprays such as lacquer and paint near the appliance. It might cause the
appliance to ignite.
 Highly volatile and flammable materials such as ether, petrol, propane gas, adhesive agents and
pure alcohol, etc. are liable to explode. Do not store these inside this appliance.
 Do not immerse the unit, power cord and plug into water.
 Unplug the appliance before cleaning or after each use.
 Do not splash water directly on the outer cabinet or the interior. This may lead to rusting and
deterioration of the electrical insulation.
 Do not use sharp objects such as knives, screwdrivers, scissors, etc. to scrape or clean the unit.
 Medications (drugs), chemicals, research and experimental substances should not be stored in
this appliance.
 Do not place heavy or fragile objects on top of the appliance.
 Use this appliance only as it is described in this manual.
 This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
 Children should be supervised to ensure that they do not play with the appliance.
Place the appliance on a flat surface.
1. Set the "WARM / COOL" switch and "AC/DC" switch to "OFF" position.
2. For AC power supply, please use the AC wire, connect the output plug to " AC 220-240V" AC jack
and connect the input plug to the power socket. Turn the "AC/DC" switch to AC , and turn the
"WARM / COOL" switch to WARM or COOL position to select the warm or cool function.
3. For DC power supply, please use the cigarette car plug , connect the output plug to "12V " DC
jack and connect the input plug to the car power socket. Turn the "AC/DC" switch to DC, and turn
the "WARM / COOL" switch to WARM or COOL position to select the warm or cool function.
4. For cool setting, turn the "WARM/COOL" switch to the "COOL" position. The Green light indicates
that the unit is cooling.
5. For warm setting, turn the "WARM/COOL" switch to the "WARM" position. The Red light indicates
the unit is warming.

SAFETY INSTRUCTIONS

OPERATING INSTRUCTIONS
6