Page 1
INSTALLATION INSTRUCTIONS Wall-mounted single-lever basin mixer Important ● We recommend that this product is installed by a qualified professional contractor. ● Please check this product immediately to ensure that it has not been damaged and is complete. Before installation, please make sure this product is the correct model and you have all the parts required for installation and using.
Page 2
Dimensions G1/2 Installation Concealed valve Base washer Screw Connector Decorating plate Spout Base plate Concealed valve Plastic cover Screw MIXER BODY Screw Handle RETAINING To remove the cartridge. First shut off the water supply to the tap. CARTRIDGE 1: Pull out the cap from the handle. CARTRIDGE COVER 2: Loosen the grub screw in handle, but do not remove it.