Advertisement
A 0967 Magnifying Lamp
Operating Instructions
Please read these instructions thoroughly before use.
General description:
The A 0967 is a magnifying lamp, with flexible metal goose-neck.
Features:
• 5-diopter, 90mm glass lens.
• A plastic lid is provided to protect the magnifying lens when it is not in use.
• 12W fluorescent tube.
• Angle-adjustable flexible metal goose-neck (30cm in length).
• Weighted base to ensure stability at all angles.
General Operation:
1. Remove the protective bags and cardboard from the A 0967.
2. Place the A 0967 on a level, strong non-slip work bench or table.
3. Plug the lamp in to an AC outlet. Ensure the connection is firm and safe.
4. Lift the plastic lid off the lens, then switch on the lamp. The on/off rocker switch is located on the base.
5. Ensure the lamp is switched off when not required. Place the plastic lid over the magnifying lens when
the magnifier is not in use.
A 0967 Mini Magnifying Lamp
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Altronic A 0967
- Page 1 1. Remove the protective bags and cardboard from the A 0967. 2. Place the A 0967 on a level, strong non-slip work bench or table. 3. Plug the lamp in to an AC outlet. Ensure the connection is firm and safe.
- Page 2 A 0967 Mini Magnifying Lamp Replacing the Flourescent Tube: 1. Switch off the lamp. Disconnect the mains plug from the AC outlet. 2. Remove the screws holding the plastic cover which sits over the 12W tube, then remove the plastic cover.
Need help?
Do you have a question about the A 0967 and is the answer not in the manual?
Questions and answers