Table of Contents
Advertisement
Setup Menu Options
Audio Setup Page
CD Upsampling
Night Mode
8
1dvp3258_98_eng.indd 38
(continued)
(underlined options are the factory default settings)
This feature enables you to convert the music CD to a
higher sampling rate using sophisticated digital signal
processing for better sound quality. If you have activated
the CD upsampling, this unit automatically switches to
stereo mode.
{ Off }
–
{ 88.2 kHz (X2) } –
{ 176.4 kHz (X4) } –
Note: CD upsampling is only possible when playback the music
CD in stereo mode.
This mode optimizes playback of sound at low volume. High
volume outputs will be softened and low volume outputs will be
enhanced to an audible level. This feature is only applicable for
DVD video discs with Dolby Digital mode.
{ On }
–
{ Off }
–
Disable CD-upsampling function.
Convert the sampling rate of the CDs
to twice as high as the original rate.
Convert the sampling rate of the CDs
to four times as high as the original
rate.
Turn on night mode.
Turn off night mode. Select this to
enjoy the surround sound with its full
dynamic range.
2008-08-11 10:01:02 AM
Advertisement
Table of Contents
