1. Manuals
  2. Brands
  3. Technaxx Manuals
  4. Diagnostic Equipment
  5. TX-116
  6. User manual

Technaxx TX-116 User Manual

Endoscope camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
Technaxx
* User Manual
Endoscope Camera TX-116
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar "Konformitätserklärung"). Before using the
device the first time, please read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
Under no circumstances shall the manufacturer or supplier assume
responsibility or be liable for any direct or indirect, incidental or
consequential damages, or for any injury, resulting from the installation
or use of this system.
Keep this user manual for future reference or product sharing carefully. Do
the same with the original accessories for this product. In case of warranty,
please contact the dealer or the store where you bought this product.
Warranty 2 years
Introduction
The endoscope camera TX-116 is an optical inspection device which is not
approved for medical use. It can be used in inaccessible places to aid
inspection and fault analysis, because it has a 1m flexible gooseneck and
adjustable LED lighting.
To display the image on a TV screen, use the built-in video-out port.
The gooseneck is waterproof (protection class IP67) and suitable for use in
aqueous liquids provided the immersion depth does not exceed 90cm.
NOTE: only the gooseneck may be exposed to moisture, NOT the control
panel (TFT monitor with handle). To use of the device in oils, lyes or acids is
NOT permitted.
WARNING: The endoscope camera is not suitable for medical
applications or use and should never be inserted into body orifices.

Advertisement

Table of Contents
loading

Summary of Contents for Technaxx TX-116

  • Page 1 Warranty 2 years Introduction The endoscope camera TX-116 is an optical inspection device which is not approved for medical use. It can be used in inaccessible places to aid inspection and fault analysis, because it has a 1m flexible gooseneck and adjustable LED lighting.

  • Page 2: Package Contents

    Gooseneck protection class IP67 (dustproof & protection against temporary immersion) Small handy hard shell case for easy storage and take away Package contents Endoscope camera TX-116 Double hook camera attachment Hard shell case Mirror camera attachment Flexible gooseneck with camera...

  • Page 3: Inserting & Replacing The Batteries

    Overview: controls & button functions Monitor Power indicator ON / OFF button View/rotate image button Camera head illumination button Handle Brightness adjustment display button Battery compartment (at the back of the device) Video-out port 10 Flexible gooseneck 11 Camera head with LEDs Inserting &...
  • Page 4 .1. The end of the ribbon should lie smoothly between the batteries and battery compartment cover. .2. Close the battery compartment by first inserting the two plastic tabs of the battery compartment cover into the slots provided for this purpose on the housing of the endoscope camera.

  • Page 5: Use Of The Device

    Use of the device Switching the endoscope camera on and off The endoscope camera is switched on and off by pressing the on/off switch [3] for approximately 2 seconds. The power indicator [2] lights up green and, after a short delay, the image is shown on the monitor [1]. Lighting The camera head is equipped with 4 LEDs.

  • Page 6: Monitor Displays

    Switch on the endoscope camera with the on/off switch [3]. The image is now displayed on both the monitor of the endoscope camera and on your playback device. Attention: In some cases the monitor of your playback device is only black/ white.

  • Page 7: Storage When Not In Use

    Then slide the attachment fixture carefully and completely over the camera head. Ensure that the attachment is positioned in the slot provided in the attachment fixture. Storage when not in use If you will not be using the endoscope camera for an extended period of time, remove the batteries to avoid leakage.
  • Page 8 Monitor Do not exert any pressure on and keep sharp objects away from the display. There is a risk of injury if the display is broken. Wear gloves if you are gathering broken parts. If the monitor becomes scratched or damaged in any way, take special care to ensure that no liquid leaks from the monitor.

  • Page 9: Technical Specifications

    (use a clean drapery). Avoid using rough, coarse-grained materials or solvents/aggressive cleaner. Wipe the cleaned device accurately. Important Notice: Should battery fluid leak from a battery, wipe the battery case with a soft cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany Enjoy your product * Share your experience and opinion on one of the well-known internet portals.

Table of Contents