DeWalt D25300D Manual page 16

E N G L I S H
Safety instructions
Always observe the safety regulations applicable
in your country to reduce the risk of fire,
electric shock and personal injury.
Read all of this manual carefully before operating
the attachment. Also refer to the manual of any
power tool that will be used with this attachment.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Keep children away
Do not let children come into contact with the
tool or extension cord. Supervision is required for
those under 16 years of age.
3 Use appropriate tool
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which it
was intended.
Warning! The use of any accessory or attachment
or performance of any operation with this tool,
other than those recommended in this instruction
manual may present a risk of personal injury.
Additional safety instrcutions for dust extraction
systems
• This attachment is intended for use in hammer
drilling applications in masonry or concrete, and
with sollid drill bits mounted to the power tool.
• Do not use the attachment for drilling
applications in wood, steel or plastic.
• Do not use the attachment in core drilling
applications.
• Do not use the attachment for chiselling
applications.
• Do not use this attachment with other tools than
the models mentioned in this manual.
• Do not use the tool in damp or wet conditions.
Package contents
The package contains:
1 Dust extraction system
1 Dust brush
1 Instruction manual
1 Exploded drawing
16
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your dust extraction system D25300D has been
designed for the extraction of dust in professional
hammer drilling applications with your heavy duty
rotary hammer drill.
The attachment is suitable for use with the following
models: D25303, D25304.
1 Dust extraction head
2 Dust brush
3 Depth stop
4 Length stop
5 Release button
6 Tool rest
7 Dust collector
Electrical safety
The electric motor has been designed for one
voltage only.
Your D WALT tool is double insulated in
E
accordance with EN 60335.
Assembly and adjustment
Prior to assembly and adjustment always
unplug the tool.
Fitting the attachment (fig. B)
• Before fitting the attachment, prepare the tool as
follows:
- Remove the drill bit if fitted
- Remove the depth stop from the side handle
(8). Do not remove the side handle!
- Set the mode selector switch (9) to the
„hammer drilling" position.
• Align the attachment with the tool as shown.
• Slide the attachment onto the tool, taking care
that the contacts (10) enter the connection slots
(11) in the bottom of the tool.
• Push the attachment into place until the locking
device engages.
• To remore the attachment, press the release
button (5) and pull the attachment off the tool.