auna LED-Beamer 10005060 Manual page 14

In order to get good image quality, do not let the sunlight shine the screen directly. If you use the projector in the
day time, please close the curtain.
Standard setting (Front projection)
Please refer to the following sheet, adjust your picture size and distance (from the lens to screen):
Screen Size
60"
72"
100"
The data maybe have 3% error, due to the image size according to the distance between projector and screen if
the distance is less than 2 meters or over 5 meters, the image may be distorted. Please check the following picture
to show the trapezoid adjustment:
Incorrect installation:
the images left-right small.
Installation method
Contact a professional service technician to mount this projector to a ceiling. Follow the instructions belowe for
the correct projector positions:
Front projection ceiling mount
Front projection table mount
Warning:
• To avoid damage beyond repair or bodily injury, secure projector mounts firmly to the ceiling or a stable surface.
• This projector can only be used in an environment with a temperature not exceeding the range of 0~35°C. The
projector may malfunction if temperatures vary outside the normal operating range.
• The sharpness of the screen might be interrupted when the projector is being used in a dusty, wet, moist or
smoke filled environment. The projector might malfunction in a moist or wet environment.
• Proper ventilation avoids overheating the projector.
4:3
2.3 m
2.68 m
3.6 m
Installed correctly:
the image is rectangular.
16:9
2.5 m
2.88 m
3.9 m
Incorrect installation,
the images right-left small.
Rear projectino ceiling mount
Rear projection table mount
14