Page 1
INSTRUCTIONS ABRASIVE BLASTER MACHINE DE SABLAGE À JET 10 GALLONS - #803010 20 GALLONS - #803020 Please read these instructions carefully before using the product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in severe personal injury and/or damage to product or property. Please retain instructions for future reference.
READ ALL INSTRUCTIONS WARRANTY BEFORE OPERATING This product has a limited one year warranty covering manufacturing defects. If you have a SAVE THESE INSTRUCTIONS product that does not work correctly within a Thank you for purchasing this Mäktig Abrasive year from the date of purchase, take the Blaster.
4. Keep work area clean and well lit. Cluttered or 18. Do not allow abrasive blaster to sit pressurized dark work areas invite accidents. while unattended or not in use. 5. Keep children away. All children should be kept 19. Make sure all equipment is rated to the away from the work area.
OPERATION Handlebars, Wheels and Foot Assembly (Figure 2) ! Warning: Always wear your hood, dust mask 1. Lay the Abrasive Blast Tank on a flat level and heavy duty canvas gloves when operating surface (such as a workbench or table top), with the abrasive blaster.
7. With the Safety Trigger open, slowly open the Abrasive Media Quick Reference Guide Abrasive Control Valve (19B) until abrasive Red Garnet material begins to flow out of the Safety Trigger. Hardness: 8 8. Adjust the Abrasive Control Valve (19B) until the Red Garnet is good for general metal usage.
• Wear protective clothing including hood (28), Caution safety eye covering, and heavy gloves when Pay particular attention to the Abrasive Hose (25), using this abrasive blaster. the Abrasive Control Valve (19B), and the Nozzles (35) as they will wear out much more quickly than •...
Page 7
PARTS DIAGRAM THIS PARTS LIST AND LINE DRAWING ARE FOR REFERENCE ONLY. THIS TOOL CAN ONLY BE SERVICED AT AN AUTHORIZED REPAIR FACILITY.