Advertisement
WARRANTY
This product has a limited one year warranty
covering manufacturing defects. If you have a
product that does not work correctly within a
year from the date of purchase, take the
product and the original receipt to your dealer
for repair, replacement or credit. Consumable
items and wear item, such as tips and hoses
are not covered under warranty.
Before returning any product, you must contact
your dealer to acquire a Return Authorization
Number.
When sending your product you must include:
1. A copy of the dated store receipt showing
the original purchase,
2. Name of store and town where product
was purchased,
3. The type of defect (I.E. leaking tank, etc.)
4. Your full name, street address and
Contact information.
We will examine the product. If the problem is
due to a manufacturing defect, we will repair
the product at no charge and return it to you. If
we cannot repair it then it will be replaced. If the
problem is due to misuse, abuse, the product
has been modified or out of warranty, we will
contact you with a repair estimate.
Invoice #: _____________________________
READ ALL INSTRUCTIONS
BEFORE OPERATING
SAVE THESE INSTRUCTIONS
Thank you for purchasing this Mäktig Abrasive
Blaster. Before attempting to operate your new
blaster please read these instructions thoroughly.
You will need these instructions for the safety
warnings,
precautions,
maintenance procedures, parts list and diagrams.
Keep your invoice with these instructions. Write
the invoice number on the inside of front cover.
Keep the instructions and invoice in a safe, dry
place for future reference.
WARNING: The warnings, cautions and
instructions discussed in this instruction manual
cannot cover all possible conditions or situations
that could occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product, but
must be supplied by the operator.
TABLE OF CONTENTS
Description
Warranty... ........................................... ..1
Safety rules ... ..................................... ...1-2
Assembly... ........................................... .2
Operation... ........................................... .3
Maintenance... .................................... ..4
Abrasive Selection... ............................ ..4
Parts List and Diagrams... .................. ..5-6
SAFETY RULES
1. Do not use any sand or silica based abrasives
with this tool. Silica based abrasives have been
linked to severe respiratory disease. Always use
OSHA recommended abrasives.
2. Know your tool. Read this manual carefully. Lea
the tool's applications and limitations, as well as
potential hazards specific to it.
3. Do not expose tool to moisture. Don't use this
tool damp or wet locations. Keep out of rain.
1
assembly,
operation,
Page #
Advertisement
