Page 3
5. Lay a blanket on the ground underneath the 8. Install the new caster wheel by first attaching hopper side. Using two people, lift the chimney the arm (91221) to the leg with the provided end and GENTLY place the hopper on the 3816X1WHB.
Page 4
11. Use the M6X1.0X38HB to install the wheel For product support contact: customerservice@yodersmokers.com. to the arm and hand tighten the M6X1.0HNN onto the bolt. Secure the wheel in place using two 10mm wrenches to tighten the nut and bolt Please also visit our forum for the product infor- onto the arm.