Table of Contents
Advertisement
Quick Links
LNWI
LocoNet Wifi Interface
Features:
▪
Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi
devices and Apps.
▪
Compatible with most Android and Apple devices running supported throttle
apps
▪
Easy Setup and Configuration. A single LNWI works 'out of the box', with no
additional configuration required.
▪
Provides up to 32 LocoNet Throttle functionality per LNWI, with compatible
apps and Command Station.
▪
Up to 8 LNWI can be supported per LocoNet
▪
Multiple LNWI units automatically resolve SSID with no additional configu-
ration
▪
Optional Wi-Fi WPA2 security for layout operations in public.
▪
Option switches to fully customize all device settings
▪
LocoNet Compatible
▪
Meets FCC Class B requirements
Parts List
1 LNWI LocoNet Wifi Interface
1 PS14 Power Supply
LNWI Quick Setup
www.digitrax.com/throttleapps/
1.
Visit
device for a list of supported apps.
2.
Follow your device manufacturer's and app vendor's instructions for install-
ing the appropriate throttle app.
3.
Place the LNWI in a convenient location and connect it to your LocoNet
system using a known good LocoNet cable.
4.
Plug in the PS14 and connect the barrel plug connector to the LNWI. The ID
light will light green being mostly lit winking off as a "heartbeat" indicator.
5.
On your Mobile Device following your device's instructions select and join
the Wi-Fi network with the SSID "Dtx1-LnServer_XXXX-7" . The XXXX for
each LNWI is the unique LNWI serial number. This is the factory default
SSID format for all LNWI devices.
6.
Open your throttle app on your device. Follow your apps instructions for
selecting the appropriate server. Most apps will automatically detect the
LNWI. If you must manually enter the server, by default the LNWI's IP
address is 192.168.7.1, Port 12090
7.
Follow your apps instructions to select and run a locomotive.
© 2017 Digitrax, Inc.
Complete Train Control
Run Your Trains, Not Your Track!
— 1 —
1 2' LocoNet cable
1 Instruction Sheet
on your compatible Mobile Wi-Fi
www.digitrax.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Digitrax LNWI
-
Page 1: Parts List
Place the LNWI in a convenient location and connect it to your LocoNet system using a known good LocoNet cable. Plug in the PS14 and connect the barrel plug connector to the LNWI. The ID light will light green being mostly lit winking off as a “heartbeat” indicator. - Page 2 Digitrax does not produce or support Mobile Devices or Throttle apps, please contact your mobile device manufacturer or Throttle app vendor for specific support. The LNWI has been tested with a range of devices and available appli- cations, however not all configurations are guaranteed to function as expected.
- Page 3 Power up your LNWI and connect it to an active LocoNet Connect a Digitrax throttle to one of the LNWI’s LocoNet connectors Press the OPS button on the LNWI. The Green ID and Red OPS indicators should start alternating blinking ON.
-
Page 4: Fcc Information
Consult the dealer or an experienced radio/TV technician for help. Note that any modifications to the equipment not expressly approved by Digitrax voids the user’s author- ity to operate under and be in compliance with CFR 47 rules, as administered by the Federal Commu- nication Commission.
Need help?
Do you have a question about the LNWI and is the answer not in the manual?
Questions and answers