Download Print this page
SPRINGER MAGRATH Stock Prod Instruction Manual

SPRINGER MAGRATH Stock Prod Instruction Manual

Advertisement

Quick Links

W A R R A N T Y
• The electronic module is guaranteed for 14 months
from date of manufacture.
• This warranty does not include the shaft, casing breakage,
or any form of physical damage, or damage due to normal
wear and tear or tampering with the power pack. Shafts are
not under warranty.
• Springer Magrath Stock Prods repaired out of warranty will
be charged accordingly and will have 3 months warranty
on the repair.
R E P A I R S
• Some Stock Prods will be beyond repair, depending on
fault. If under warranty a replacement pack may be issued
at the discretion of Springer Magrath Company.
PLEASE INCLUDE:
- Contact Name
- Contact Phone Number, including area code
- Possible problem (eg. intermittent spark)
- Do not return shaft
- Do not return batteries
• Stock Prods are to be sent to:
SPRINGER MAGRATH COMPANY
404 West B Street, McCook NE 69001
WARNINGS
•The Stock Prod is DESIGNED FOR USE ON LIVESTOCK ONLY.
•KEEP THE UNIT AWAY FROM CHILDREN & NEVER USE IT ON HUMANS.
•KEEP PROD DRY.
•Clean, Dry, and Store Stock Prod unit in dry environment.
Remove batteries prior to cleaning or drying.
•If unit gets wet IMMEDIATELY TAKE STEPS TO THOROUGHLY DRY
UNIT OUT to avoid corrosion and/or unintended feedback.
•The Stock Prod generates a high voltage pulse, and you should never
touch the electrodes while the batteries are in the unit.
•The Stock Prod is always ready for use when batteries are inserted and one
shock is stored in the tip after release of the switch so handle it with
caution.
•Use in a well ventilated area. Do not use near flammable liquids or dust.
•Intended for ground use only.
SPRINGER MAGRATH COMPANY
404 West B Street, McCook NE 69001
WWW.SPRINGERMAGRATH.COM
SPRINGER MAGRATH
Stock Prod
Instruction Manual
7202119
Now with NEW
Insulated Trigger
Operating
Instructions
Problem Solving
Warranty
Repair Service
Warnings

Advertisement

loading
Need help?

Need help?

Do you have a question about the Stock Prod and is the answer not in the manual?

Questions and answers

Summary of Contents for SPRINGER MAGRATH Stock Prod

  • Page 1 •The Stock Prod generates a high voltage pulse, and you should never touch the electrodes while the batteries are in the unit. •The Stock Prod is always ready for use when batteries are inserted and one SPRINGER MAGRATH COMPANY shock is stored in the tip after release of the switch so handle it with caution.
  • Page 2 • Sparking on contact should occur Stock Prod does not work after checking (a), (b) or (c) above, • If wet: Discontinue use immediately - remove insulated then return Prod to Springer Magrath Company for service.