Advertisement
Sunfish Mast Kit:
Here is a list of tools
that we recommended
Locate the mast, upper and lower boom. The upper and lower boom will be connected at one end with
you have to assist you
two interlocking eye bolts (Figure 3). The gooseneck (Figure 4) will come assembled on the lower
boom. Depending on the model that you purchased the gooseneck bolt may differ in appearance. On
in assembling your
the Sunfish Pro model the gooseneck comes equipped with a quick adjust lever (Figure 5). This lever
new Sunfish:
can easily be released in order to adjust the positioning of the gooseneck on the lower boom. Also
located on the Sunfish Pro lower boom are two outhaul clam cleats (Figure 6).
Sunfish Mast Kit Standard:
Sunfish Mast Kit Pro:
Electrical Tape
Figure: 4
Figure: 5
Screw Drivers
Interlocking eye bolts
Figure: 3
Wrenches
Utility Knife
Cleats
Standard Mast and Boom Set
Figure: 6
Pro Mast and Boom Set
Pliers
Be sure to remove any bubble wrap and plastic coating before rigging.
Advertisement
