Advertisement
Document No. 563-003
Installation Instructions
January 12, 2007
Antenna Mounting
Direct Mount Antenna
The preferred mounting configuration is to mount
the FPX outside the field panel enclosure and in a
location where it will establish the maximum number
of communication links with Field Level Network
Ceiling
Remote Mount Antenna
The FPX is mounted inside the field panel enclosure,
and the antenna is brought through a 1/2" knockout
with the antenna extending out the top of the cabinet
(Figure 3).
The antenna extension cable is 12" long.
Page 2 of 4
Figure 2. Radio Mounted Outside Field Panel Enclosure.
Transceivers (FLNXs). For example, for a VAV
application this will likely be above the field panel in
the ceiling plenum (Figure 2).
Power and
Communication
Back to Field Panel
Mechanical Room
Figure 3. Radio Mounted Inside Field Panel
Enclosure.
zzz
CAUTION/ATTENTION
Siemens Building Technologies, Inc.
Advertisement
