Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Align Super Combo TREX 500PRO DFC RH50E01XT
Summary of Contents for Align Super Combo TREX 500PRO DFC RH50E01XT
- Page 7 All these balls are in THIS set. Lots of extra stuff.
- Page 8 Yellow Struts Green Struts Orange Struts...
- Page 24 It is best to do this before installing servos.
- Page 28 Use the rudder stick to enter this setting mode. The status light will flash twice. Use the rudder stick to enter this setting mode. The status light will flash three times.
- Page 29 Use the rudder stick to enter this setting mode. The status light will flash four times. Use the rudder stick to enter this setting mode. The status light will flash five times.
- Page 30 Adjust the control rod in RATE MODE so the model doesn't yaw in a hover. If it yaws left, shorten the rod. If it yaws right, Click here to watch my video on tail lengthen the rod. rotor basics.
- Page 36 For safety, remove the blades before doing this. Stay clear of the tail and head in case they turn. The motor must be connected in order to hear the tones.
- Page 37 Here you can verify your settings...