Step 6: Connecting The Power Cord; Optional: Connecting Additional Equipment - Philips MCD735/37B Owner's Manual

Step 6: Connecting the power
cord
1
~ AC MAINS
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
Optional: Connecting additional
equipment
IMPORTANT!
– Some discs are copy-protected. You
cannot record the disc through a VCR or
digital recording device.
– When making connections, make sure
the colour of cables matches the colour
of jacks.
– Always refer to the owner's manual of
the other equipment for complete
connection and usage details.
C
B
P ower Outlet
VIDEO IN
AUDIO IN
R
VCR
L
AUDIO OUT
L
R
A
Television
Viewing and listening to the playback of
other equipment A
●
Connect the system's AUX IN (R/L) jacks to
the AUDIO OUT jacks on the other audio/visual
device (such as a TV, VCR, Laser Disc player or
cassette deck).
Before starting operation, press SOURCE on
the system to select AUX or press AUX on the
remote in order to activate the input source.
Recording (digital) B
●
Connect the system's COAXIAL jack to the
DIGITAL IN jack on a digital recording device
(such as DTS-Digital Theatre compatible, with
Dolby Digital decoder).
Before star ting operation, set the DIGITAL OUT
according to the audio connection. (See
"DIGITAL OUT".)
Using the VCR for recording DVDs C
●
Connect the system's A/V OUT jacks to the
corresponding VIDEO IN jack and AUDIO IN
jacks on the VCR with the supplied A/V cable by
matching the connector types. This will allow you
to make analogue stereo (two channel, right and
left) recordings.
Connections
13