Philips CTS4000/98 Quick Start Manual page 21

Access DVD menu
1
Press DISC to access disc main menu.
2
Select a play option, then press OK.
• In some menus, press
to input your selection.
• To return to the title menu during
playback, press MENU.
Access VCD menu or preview menu
The PBC (Playback Control) for VCD is turned
on by default in the factory. When you load in a
VCD, the contents menu is displayed.
1
Press vV to select a play option, then
press OK to start play.
• If PBC is off, it skips the menu and starts
play from the fi rst title.
• During playback, you can press
to return to the menu (if the PBC
mode is on).
2
To preview the contents of the disc, press
DISC.
• To exit the menu, press
number buttons
MENU
DISC.
Select Digest Type:
Track Digest
Disc Interval
Track Interval
[ Track Digest ]
It plays the fi rst few seconds of each track
in a disc.
[ Disc Interval ]
It divides the total disc time by six and
plays the fi rst few seconds of these
intervals.
[ Track Interval ]
It divides the current track by six and plays
the fi rst few seconds of these intervals.
• This option is not available in stop
mode.
3
Select a preview play option, then press
OK.
Tips
•
The default setting for PBC is on. To change the
default setting, see chapter 'Adjust settings' -
[ Preference Setup ] > [ PBC ] for details.
EN 21