Page 2
Introduction Congratulations on your new WheelChair Carrier product purchase! The Tilt ‘N’ Tote carrier is the easiest way to transport your folding wheelchair. The Tilt ‘N’ Tote Plus will accommodate folding wheel chairs with 8” to 13” Diameter Wheels, and with a separate locking arm it can accommodate a standard 24”...
Page 3
2-1/2” wide. Please be sure to purchase this size draw bar when purchasing a trailer hitch. Some class 3 hitches have an extra wide drawbar that measures over 2-1/2” in width. If this size drawbar is encountered, please contact your local dealer or WheelChair Carrier and the proper anti-rotation bracket will be provided to you.
Page 4
Operation Instructions • Tilt the carrier to the ground using Pull Pin-A. Roll the chair into the carrier so rear wheels are contained in the large wire form saddle. Tip the chair and carrier forward until Pull Pin-A snaps back into position. •...
Page 5
If you find anything upon inspection, DO NOT USE THE CARRIER! Contact your local dealer or WheelChair Carrier for any repairs that need to be made. Failure to act may cause severe injury! •...
Page 6
All returns must be made within 30 days from the date of purchase unless due to defect. Written authorization MUST be obtained from WheelChair Carrier, Inc. prior to the return of any merchandise for any reason, and all transportation costs must be prepaid. NO RETURNS on custom orders.
This manual is also suitable for:
Tilt n tote plus 004Tote 003Tilt 'n' toteTote001003
Need help?
Do you have a question about the Tilt N Tote 001 and is the answer not in the manual?
Questions and answers