Summary of Contents for logika WL-ZAVCDPW-C322121-0
- Page 1 Smart Cloud Camera WL-ZAVCDPW-C322121-0 Product Manual Version 1.0 © 2019 Logika Limited...
- Page 2 Introduction Thank you for choosing Logika. Please take a moment to carefully read through the manual to ensure safe and proper installation and use. • Before use, the product must be properly installed as described in this manual by a qualified technician.
-
Page 3: Device Layout
Device Layout... -
Page 4: Specifications
Features • Communication Mode: IEEE 802.15.4 Zigbee, IEEE 802.11b/g/n. Full HD 1080p video. • • Pan and tilt functionality (horizontal 335°, vertical 120°) Supports two-way voice communication. • Built-in motion detection to start recording and send an alarm notification. • •... -
Page 5: Installation Steps
Installation Steps Installing the Cloud Camera There are two options for mounting the camera: Option A: Place the camera upright on a suitable flat surface. Option B: Mount the camera on the ceiling. Bear in mind that, as the camera is effectively upside down in this case, you will need to update the orientation in the device settings in the mobile app, once it has been added to the system. - Page 6 Adding the Device to the Smart Home Network Use the Logika Smart Home app to add the device to the Smart Home system. Please refer to the Logika Smart Mobile App user guide which will take you through the process of adding smart devices to the system.
-
Page 7: Device Functions
In this mode, the camera can act as a Gateway device, allowing addition of other smart devices on the network. This means that you do not need to use a Logika Gateway device, as this will perform the same functions. -
Page 8: Troubleshooting
You should now be free to add the device to the local smart network. The issue you are experiencing is not mentioned here. Please contact us at support@logika.nz with your issue and we will do our utmost to help!