Changing Settings - ION F-SP 12 Quick Start Manual

ION F-SP 12
Quick Start Guide

Changing Settings

The other functionality of the web portal is to
change system settings that the Sensorpod
uses. This includes; Email server settings, login
username/passwords, SNMP settings, and Network
configuration.
All Alarm notification setup is done in the
'Alarms' sub-menu. By default, any alarm that is
generated by setting the thresholds as defined in
'CONFIGURING ALARMS', will attempt to notify
the recipient set under 'Alarm Groups'. A single
alarm will be sent when the alarm is tripped, and a
follow-up email when the alarm has been reset. In
an upcoming firmware update, users will have more
verbose control over alarm notifications.
The Settings menu can be found by clicking on the
Settings icon in the navigation bar on the far left.
The 'System' sub-menu is used to change
system settings such as login password
and the current Date and Time.
The 'Network' sub-menu is used to modify
the connection details of the network
interface, including DHCP status, IP
Addresses and DNS server.
SMTP Server settings allow configuration of the SMTP
server the Sensor pod will use to send out notification
emails. Current server settings allow the use of
Insecure SMTP server relays only, as well as LOGIN
and PLAIN Authentication options.
SNMP settings allow configuration of the SNMP Agent
running on the Sensor Pod. The MIB file running on
the SNMP Agent can be downloaded from the settings
page, or at the ION website.
8