Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19j
Advertisement
Related Manuals for Pittsburgh Automotive 69514
Summary of Contents for Pittsburgh Automotive 69514
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
11. Verify replacement jack has same rating, mounting points and maximum length. 6. Do not allow load to swing or drop violently while lowering or moving. 12. Do not use for aircraft purposes. Page 2 For technical questions, please call 1-888-866-5797. Item 69514... - Page 3 And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of injury and may void any applicable warranty. SAVE THESE INSTRUCTIONS. Item 69514 For technical questions, please call 1-888-866-5797. Page 3...
-
Page 4: Specifications
WARNING! For safety and ease of assembly, use two people to assemble the Shop Crane. CAUTION! DO NOT TIGHTEN ANY BOLTS UNTIL YOU ARE FULLY FINISHED WITH ASSEMBLY. OTHERWISE PARTS WILL NOT LINE UP PROPERLY. Page 4 For technical questions, please call 1-888-866-5797. Item 69514... - Page 5 Post to the Base. Washer Bolt (16) Figure E 4. Use the Bolt, Washer and Nut to attach the Boom to the top of the Post. Item 69514 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Hook and Chain to the end of the Boom Extension. 7. After assembly, tighten all Nuts and Bolts securely using a Wrench or Socket (sold separately). Figure H: Assembled Engine Crane Page 6 For technical questions, please call 1-888-866-5797. Item 69514...
-
Page 7: Operation
If, after bleeding, the equipment still does not appear to be working properly, do not use the equipment until it has been repaired by a qualified service technician. Item 69514 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Maintenance
Jack in a safe, dry location out of reach of once every three years: children and other non-authorized people a. With the Jack fully lowered, remove the Oil Filler Plug on the side of the Housing. Page 8 For technical questions, please call 1-888-866-5797. Item 69514... - Page 9 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 69514 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Parts Lists And Diagrams
Hex Bolt M16x80 Hex Bolt M14X90 12 13 12 13 1213 12 13 Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 10 For technical questions, please call 1-888-866-5797. Item 69514... - Page 11 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 69514 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 69514 and is the answer not in the manual?
Questions and answers
how to add hydrolic oil
To add hydraulic oil to Pittsburgh Automotive part number 69514:
1. Tip the jack to drain the old hydraulic oil completely from the housing.
2. Dispose of the old oil according to local regulations.
3. Set the jack upright.
4. Fill the housing with high-quality hydraulic oil until oil begins to run out of the oil fill hole.
5. Open the valve release screw and pump the handle to bleed air from the system.
6. Reinstall the oil filler plug.
This answer is automatically generated
Looking for replacement lock pins (part # 26)
The replacement lock pins for Pittsburgh Automotive part number 69514 are the Lock Pins used to secure the Legs to the Base. Each Lock Pin is inserted through aligned holes and secured with an R-Pin through a small hole at the end of each Lock Pin.
This answer is automatically generated