Member's Mark TZ70BN053X02 Assemnly Instructions

Colección 2019

Unpacking, Assembly and Shaping

1) Before you start to assemble your tree, choose a location near a wall outlet.
2) Carefully remove contents from the carton. Contents will include:
1. Tree Top: Section A 2. Middle Tree: Section B 3. Bottom Tree: Section C 4. Tree Stand
Do not discard carton! Use for Tree Storage.
CAUTION: MAKE SURE EVERYTHING IS CLEAR OF BRANCH HINGES
3) Insert the bottom tree section into the stand body. Allow the branches to fall into place or gently pull them out and down.
4) Insert the tapered end of middle tree section pole into the bottom tree section pole. Allow the branches to fall into place or gently
pull them out and down.
5) Place the tree top into the middle tree section pole. Allow the branches to fall into place or gently pull them out and down.
6) Begin to shape the branches working from the bottom to the top.
Start with tips farthest from the pole, one to the right, one to the left,
and one at the center of the main stem.
7) After shaping the whole tree following the previous steps, step back
and take an overall look at the tree. Shift branches to fill any gaps.
Slightly up sweep all branch tips for a uniform look. Your tree is now
ready to light, decorate and enjoy.

Disassembly and Storage

1) Unplug cord(s) from wall outlet.
2) Unplug the tree sections from the cord(s).
3) Gently lift off each tree section from top to bottom. Remove the stand
from the bottom section.
4) Carefully place the tree sections back in the storage carton and tape it
shut. Store carton in a cool, dry place where the emperature does not
exceed 100 degrees Fahrenheit.
08-19 041-190401
Section B
Section C
1
Top
View
Side
View
Section A