Philips DVDR7260H/05B User Manual page 77

Access settings
(underlined options are the factory default settings)
Childlock
Change PIN
Enter PIN of your choice
This will be used to access locked features.
PIN Code
####
Cancel
Features settings
Auto resume
System Menu Options
You will be prompted to enter the four-digit pin code.
– When doing this for the fi rst time, use the alphanumeric keypad 0-9
on the remote control to enter any four-digit pin code you prefer.
– If you forget your four-digit pin code, key in '1504'. Then enter any
four-digit you prefer and enter the same pin code again to confi rm it.
With this feature, you can prevent children from viewing certain discs or
the recorded titles in the HDD. When this feature is enabled, it will
appear as { CHILDLOCK } at the bottom of the coloured options screen
whenever you select a title in the content menu. You can press the
Yellow button on the remote control to set the childlock on or off.
Note: This recorder can memorise settings for 50 discs.
{ On } – Turns on child lock function.
A four-digit pin code must be entered in order to play
the locked disc or title in the HDD.
{ Off } – All discs can be played.
Use the alphanumeric keypad 0-9 to enter your new four-digit pin code.
You must enter the same pin code again to confi rm it.
To cancel your change, press
press OK on the remote control.
(underlined options are the factory default settings)
With this feature, you can resume playback of the disc from its last
stopped point. This applies to the last 20 DVDs and Video CDs you
played.
{ Off } – The disc will always start from the beginning when you
load a disc or start playback.
{ On } – Turns on auto resume mode.
When playback stopped, the content menu will appear.
To resume playback, press OK while selecting the title
in the menu.
Note: Pressing PLAY
playback from the beginning of the disc .
to select { Cancel } in the menu and
will cancel the resume mode and start
(continued)
77