Table of Contents
Advertisement
Adjusting volume control
Press VOL +-on the remote control
to increase or decrease the volume level.
'VOL MIN' is the minimum volume
level and 'VOL MAX' is the maximum
volume level.
To listen through the headphones
Plug the headphones to the PHONE
socket on the front of the receiver.
The speakers will be muted.
The current surround sound will change
to stereo mode.
To restore playback through the
speakers, unplug the headphones.
To turn off the volume temporarily
Press MUTE on the remote.
Playback will continue without sound
and 'MUTE ON' appears on display
panel.
To restore the volume, press MUTE
again or increase the volume level.
1_htr5204_eu_eng.indd 21
1_htr5204_eu_eng.indd 21
Sound and Volume Controls
Adjusting for 'Lip Sync' delays
This feature allows you to adjust the
audio delay times if the video playback is
slower than the audio output streams
(also known as 'Lip-sync'). To correct
'Lip-sync' error caused by the delayed
video, delay audio output time by an
equal amount.
A
Press AUDIO SYNC on the remote
control.
B
Within fi ve seconds, use the VOL+-
to set the audio output delay times
(0 ~ 200 ms).
If the volume control is not used
within fi ve seconds, it will resume its
normal volume control function.
(continued)
21
2007-02-13 11:27:46 AM
2007-02-13 11:27:46 AM
Advertisement
Table of Contents
