Navigate Through The Menu; Setting Up Listening Modes - Philips HTR9900/12 User Manual

After the measurements, the High Defi nition
A/V Receiver calculates the ideal system
response for your particular room and speaker
setup. If some inconsistencies or discrepancies
are detected during the setup, the process
maybe interrupted or the problem is shown in
the particular setup window. A notice screen is
correspondingly displayed. After following and
undertaking the displayed instructions, re-start
the Auto Calibration setup again. When the
measurements are fi nalised, the High Defi nition
A/V Receiver calculates the ideal system
response for your particular room and speaker
setup.
Note
•
The test tone emitted during measurement is loud. This
maybe bothersome for you and may affect as well your
other household members and even your neighbour.

Navigate through the menu

To navigate through the on-screen menu
options, please do the following using the
remote control or corresponding front panel
buttons:
1
Press B to select a menu item. Use vV
buttons to move up or down the Menu
selections. Repeatedly press B to advance
or go further into the sub-menu of a
desired menu item.
2
When you are at a menu item and you
want to set or change the parametre value
(setting), press B again until "^ν" is
displayed on the extreme right of the
menu item. Use vV buttons to move up
or down the menu options.
3
Press OK to save the settings or changes
done on the current menu or sub-menu.
4
Press BACK/EXIT to exit from a particular
menu and return to the previous menu.
EN
18

Setting up listening modes

Press SETUP / MENU button of the remote
control or front panel to display the High
Defi nition A/V Receiver's Main menu on your
video monitor/TV. If the on-screen menu does
not appear, check your MONITOR OUT or
HDMI OUT connections.
The Main Menu contains the menu options:
[Listening mode]
•
[Audio synchs]
•
• [Tone controls]
• [Settings menu]
Listening mode
Audio synchs
Tone controls
Settings menu
1
On the Main Menu, use vV buttons to
navigate through the menu and select
[Settings menu], then press B.
Settings menu
Source setup
Speaker setup
Trigger setup
Listening Mode setup
Video setup
Language setup
2
On the [Settings menu], use vV buttons
to navigate through the menu and select
[Listening Mode setup], then press B.
Source setup
Speaker setup
Trigger setup
Listening Mode setup
Video setup
Language setup
Listening Mode
Dolby Setup
DTS Setup