Advertisement
1
Connect
A
Connect to TV
C
Connect subwoofer and power cable
Main Unit (rear)
A
OPTICAL
DIGITAL IN
HDMI OUT
HDMI IN
SPDIF OUT
(Optical)
A
Connect a HDMI cable (supplied) from the HDMI
A
Connect the interconnect cable between TO MAIN
OUT socket to the HDMI IN socket on your TV.
UNIT socket on the subwoofer and TO
B
Connect an optical cable (supplied) from the
SUBWOOFER socket on the main unit.
DIGITAL IN-OPTICAL socket to the SPDIF OUT/
B
Connect the FM extension cable and FM antenna
OPTICAL OUT sockets on your TV.
to the inner pin of the FM 75
the wire for optimum reception.
Note
C
– If your TV does not support HDMI, connect a scart
Connect the power cable from subwoofer
converter cable from the CVBS socket to the SCART
to the AC power outlet.
socket on your TV.
– To listen to the audio output from this connection,
press AUX/ MP3 LINK repeatedly until 'DI' is
displayed on the display panel.
D
Attach table stand and Flavors
frames
B
Connect speakers
LEFT
A
RIGHT
A
Place the main unit/speakers on a flat surface with
Subwoofer (rear)
the front panel facing up.
B
Attach the frames to the front panels of the unit and
Connect the left and right speakers to the matching
speakers.
sockets on the subwoofer.
C
Attach the table stand to the rear of the main unit
and slide it to the left to lock into position.
fts6000_12_6ppqsg_eng3_final.ind2 2
fts6000_12_6ppqsg_eng3_final.ind2 2
Set up
2
A
Find the viewing channel
A
Press 2 to turn on this DVD Home Theatre unit.
B
Turn on the TV. Use the TVs remote control to
B
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
you see the Video In channel.
C
Subwoofer
B
Select on-screen display language
Main Unit (rear)
(rear)
A
Press OPTIONS.
[ General Setup ] menu is displayed.
B
Press B.
socket. Extend
General Setup
Disc Lock
Themes
Display Dim
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code
Press OPTIONS to exit menu
C
Press V to select [ OSD Language ], then press B.
D
Press vV to select a language option, then press
C
OK.
E
Press OPTIONS to exit.
B
Note The language set here is only for the menus
that are shown on the TV while operating this DVD
Home Theatre unit, not for the DVD disc menu.
C
Apply a menu theme
You can change the appearances of your wallpaper and
mp3 browser.
A
Press OPTIONS.
[ General Setup ] menu is displayed.
B
Press B.
°
button) until
General Setup
Disc Lock
Themes
Display Dim
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code
Press OPTIONS to exit menu
C
Press V to select [ Themes ], then press B.
Auto
Themes
English
Dansk
Pure White
Nederlands
(Default)
Suomi
Français
Deutsch
Italiano
D
Press
to select a theme, then press OK.
A message appears.
E
Select [ Yes ] to confirm, then press OK.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this DVD Home
Theatre unit. Refer to the user manual for more
information.
3
Enjoy
A
Start disc play
B
Play other supported devices
Press ç to open the disc compartment.
A
USB device
B
Place a disc with the disc label facing out.
A
Insert your USB device to
Press ç to close the disc compartment and start
C
B
Press USB/RADIO repeatedly to switch to 'USB'
disc play.
mode.
If the disc menu is displayed on the
C
Select a file to play, then press u.
TV, use cursor buttons to select an
option in the menu, then press OK.
D
To stop play, press x or remove the USB device.
To enjoy powerful surround
sound, press SURROUND to
turn on the multi-channel
Other portable media player
surround mode.
A
Connect a 3.5mm stereo audio cable (supplied)
D
Press x to stop play.
from the MP3 LINK socket to the headphone
output socket on your portable media player.
Note When you press u, playback
B
resumes from where it was last
Press AUX/MP3 LINK repeatedly until
stopped. To start playback from the
'MP3 LINK' is displayed.
beginning, press í while the message is
C
Press PLAY on your portable media player.
displayed.
(USB) socket.
2008-09-03 6:45:03 PM
2008-09-03 6:45:03 PM
Advertisement
