Philips HTS6600/98 User Manual page 44

Setup Menu Options
Preference Setup Page
Password
DivX Subtitle
Default
44
(continued)
(underlined options are the factory default settings)
The password is used for the Disc Lock and Parental. The default
password is '0000'. To change the password:
1) Press OK to access the change password menu.
Change Password
Old Password
New Password
Confirm PWD
2) Use the numeric keypad 0-9 on the remote control to
enter your existing four-digit password at { Old Password }.
Note: When doing this for the fi rst time or if you forget your existing
password, key in '0000'.
3) Enter the new four-digit password at { New Password }.
4) Enter the new four-digit password again at { Confi rm PWD }.
5) Press OK to confi rm and exit the menu.
Select the font type that supports the recorded DivX subtitle.
{ Standard } – Display a standard list of Roman subtitle fonts
provided by this unit.
This feature enables you to reset all the setup menu options and
your personal settings to the factory defaults, except your
password for the Disc Lock and Parental.
Press OK to confi rm the default reset.
OK