Summary of Contents for Texim Europe Sol Chip Comm Wireless Solar Tag System Kit
- Page 1 157 Jaffa Street, "Amot Building" Haifa Israel ,35251 Fax + (972) 4 6228513 . Tel + (972) 4 8216942...
-
Page 2: Document History
Installation and Operating Guide: Sol Chip Comm™ Wireless Solar Tag System Kit Document version: 0.5 Document History Date Version Version Description February 26, 2017 Initial version March 1, 2017 March 8, 2017 0.21 Add box picture, removed comments May 5, 2017 Updated with new IoT Portal May 14, 2017 Added User Profile Settings... - Page 3 Kit Content Detailed Description Attention: Carefully unpack the Demo kit. When unpacking, care should be taken to prevent dropping Item Item name Qty. Description Picture Sol Chip Comm™ The SCC is an all-weather, solar Solar All weather Wireless Solar Tag – panels resistant box powered device that connects to...
- Page 4 Qty. Item Item name Description Picture conditions. Distance will be shorter in non-line of sight conditions) Cellular Antenna Plugged into the gateway in order to access the cellular network Wireless Gateway Powers the wireless gateway 4 pin “Molex” Connector Power Supply + Adaptor Wall Adaptor SCC Charger + Wall...
- Page 5 Qty. Item Item name Description Picture Soil Moisture sensor data sheet Air Temperature and humidity sensor data sheet 157 Jaffa Street, "Amot Building" Haifa Israel ,35251 Fax + (972) 4 6228513 . Tel + (972) 4 8216942...
- Page 6 Kit Deployment Guidelines and Tips Below is a general schematic showing multiple SCCs installed in a field, connected to a single Wireless Gateway which in turn sends the sensors’ data to the Sol Chip website. The website is accessible to the user in real time via his/her mobile device, tablet or PC.
- Page 7 Detailed Installation Guideline Prior to installation in the field, it is highly recommended to connect and activate the system in your office or lab. This will help you to get familiar with the system and make sure that everything is operational prior to placing it in the field.
- Page 8 c. * Place each of the SCCs in a place exposed to sun light, up to the maximum height from the sensor as per sensors’ cables length. Best energy results are obtained when unit is pointed to area where maximal exposure to sunlight travel is obtained, (e.g. to the south at northern hemisphere countries).
- Page 9 e. Plug the gateway to AC power Attention: While the Wireless Gateway is operational, one should note that in order to avoid permanent damage, neither cellular devices, nor SCC tags should be brought near the gateway’s immediate surroundings (less than 20 centimeters) Attention: The Wireless Gateway has limited lighting protection and it is the user’s responsibility to install surge protection on the antenna and lighting protection near the gateway unit...
- Page 10 4. Activate your account at the Sol Chip IoT Portal (powered by Telit deviceWISE) https://solchip.devicewise.net a. You should have received an email with an invitation to activate your account. Look for the following email: From: Telit IoT Portal <noreply@devicewise.com> Subject line: Welcome to the Sol-Chip Portal (powered by deviceWISE) * If you cannot locate the email, contact your distributor or support@sol-chip.com b.
- Page 11 c. Your account is now activated, proceed to login d. After login, please review and agree to the general terms and conditions, and privacy policy of the portal. e. After approving both pages, you will be taken to the Dashboard 157 Jaffa Street, "Amot Building"...
- Page 12 5. Using the Sol Chip IoT Portal (powered by Telit deviceWISE) Please note, we are constantly updating and improving the Portal, please watch for release updates by email or in the Main Dashboard. a. To login, go to https://solchip.devicewise.net and enter your login information •...
-
Page 13: Operation
Operation On-going operation: The operation of the system is essentially seamless. Once everything is connected, each SCC automatically reads its sensor every 30 minutes and immediately upload their data to the Sol Chip IoT Portal. This data is stored and is accessible for viewing by the user. We are constantly updating our services, always check the latest version of the user guide on our website at https://solchip.devicewise.net... - Page 14 Sensor visualization service: Below is an example of a Temperature sensor graph. The user can set the time window to view historical data and horizontal zoom (shorter time higher time resolution), by clicking on the date picker 157 Jaffa Street, "Amot Building" Haifa Israel ,35251 Fax + (972) 4 6228513 . Tel + (972) 4 8216942...
-
Page 15: Troubleshooting
Troubleshooting Please note that each SCC System Kit was fully tested as a system prior to shipment. If you have issues, please identify the indication you observe in the table below and follow the relevant troubleshooting procedure: Proce Indication Potential Steps dure cause(s):... - Page 16 5. Check if there are metallic or other obstructions between the SCC and the gateway; try to activate the SCC by passing the magnet 6. Bring the SCC closer to the gateway; try to activate the SCC by passing the magnet 7.
-
Page 17: Contact Details
Contact details The Netherlands Belgium UK & Ireland Elektrostraat 17 Zuiderlaan 14 bus 10 St. Mary’s House, Church Lane NL-7483 PG Haaksbergen B-1731 Zellik Carlton Le Moorland Lincoln LN5 9HS +31 (0)53 573 33 33 +32 (0)2 462 01 00 +44 (0)1522 789 555 F: +31 (0)53 573 33 30 +32 (0)2 462 01 25...
Need help?
Do you have a question about the Sol Chip Comm Wireless Solar Tag System Kit and is the answer not in the manual?
Questions and answers