Download Print this page

Philips HTS6600/55 Quick Start Manual page 2

Philips dvd home theatre system hts6600
Hide thumbs Also See for HTS6600/55:

Advertisement

1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the speakers at the normal listening ear level,
equal distance from the TV and face it straight ahead
towards the listening area.
B
Place the subwoofer on the floor, at least one meter
away from the TV.
B
Remove rear cover from main unit
A
Carefully push down the rear cover from the top
and detach it from the main unit.
B
After all the connections have been made (see the
following sections for details), close the rear cover
by fitting the catches into the holes and pushing
upwards.
C
Connect the speakers and main unit
to subwoofer
LEFT
RIGHT
Subwoofer (rear)
SPEAKER
SPEAKER
SPEAKERS
RIGHT
LEFT
FM/AM ANTENNA
AM
FM 75
L
R
COAXIAL
AUX 1
AUX 2
SIRIUS
DIGITAL IN
TO MAIN UNIT
MAINS
SPEAKERS
RIGHT
LEFT
B
A
TO SUBWOOFER
Pr
Pb
TO SUBWOOFER
Pr
Pb
Y
L
AUDIO IN
Y
R
COMPONENT
VIDEO OUT
VIDEO OUT
HDMI OUT
A
Connect the left speaker to the SPEAKER LEFT jack
and the right speaker to the SPEAKER RIGHT jack at
the rear of the subwoofer.
B
Connect the TO MAIN UNIT cable from the
subwoofer to the TO SUBWOOFER jack at the rear
of the main unit.
D
Connect the main unit to TV
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
or
TO SUBWOOFER
L
Pr
Pb
AUDIO IN
L
AUDIO IN
Y
R
R
COMPONENT
VIDEO OUT
VIDEO OUT
VIDEO OUT
HDMI OUT
Main unit (rear)
HDMI OUT
Connect a composite video cable (supplied) from the
VIDEO OUT jack on main unit to the VIDEO IN jack
on your TV.
If your TV supports HDMI, connect the HDMI cable
(supplied) from the HDMI OUT to the HDMI IN
jack on your TV.
E
Connect the radio antennas and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
Subwoofer (rear)
FM antenna
A
FM 75
SPEAKERS
AM/MW
RIGHT
LEFT
FM/MW ANTENNA
AM/MW
FM 75
L
antenna
R
COAXIAL
AUX 1
AUX 2
DIGITAL IN
TO MAIN UNIT
MAINS
Main Unit (rear)
B
C
A
Connect the FM antenna to the inner pin of the
FM 75
jack. Extend the antenna for optimum
reception.
B
Unfold the AM/MW loop antenna and fix the claw
into the slot. Push the tabs and insert the wires into
the AM/MW jacks.
C
Connect the power cable from subwoofer to the AC
power outlet.
F
Connect audio output from TV
(optional)
To hear the TV audio through this home theater system,
use the red and white audio cables (not supplied) to
connect the AUDIO IN jacks on the main unit to the
AUDIO OUT jacks on your TV.
AUDIO
OUT
Television ( rear)
AUDIO OUT
(CVBS)
VIDEO IN
Main Unit (rear)
TO SUBWOOFER
Pr
L
Pb
L
Y
AUDIO IN
AUDIO IN
R
COMPONENT
VIDEO OUT
VIDEO OUT
R
HDMI OUT
VIDEO OUT
Note Press TV on the remote control to get the
sound output from the speakers system when watching
the TV program.
2
Set up
A
Finding the viewing channel
Press 2 (STANDBY ON) on the main unit to turn
A
it on.
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT,
button) until
you see the Video In channel.
B
Setting up the speakers
When you turn on this unit for the fi rst time, the
speaker setup message appears on the TV.
A
Press SETUP on the remote control to enter
'General Setup Page'.
B
Press cursor down to highlight { Ambisound
Setup } followed by pressing cursor right key.
C
Select one of the options below and press cursor
right key.
{ Room Acoustics }
{ Hard } - for concrete or wooden walls.
{ Soft } - for curtains or an open space.
{ Speakers Distance }
{ Near } - 'X' is less than 1.2 meters (3.9 ft).
{ Default } - 'X' is between 1.2~2 meters (3.9~6.5 ft).
{ Far } - 'X' is more than 2 meters (6.5 ft).
{ Listening Position }
{ Near } - 'Z' is less than 2 meters (6.5 ft).
{ Default } - 'Z' is between 2~3 meters (6.5~9.8 ft).
{ Far } - 'Z' is more than 3 meters (9.8 ft).
Note The underlined options are the default setting.
FRONT L
FRONT R
TV
X
Speakers Distance
Z
Listening
Position
D
Select a most suitable predefined setting and press
OK to confirm.
E
Once complete, press SETUP to exit the menu.
Note Refer to the accompanying user manual
for other setup options.

Advertisement

loading

This manual is also suitable for:

Hts6600