Advertisement
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
B
Connect speakers
Subwoofer (rear)
LEFT
RIGHT
A
Connect the left and right Ambisound speakers to
the matching sockets on the subwoofer.
C
Prepare for rear connections
A
Push up the catch and remove the rear cover.
B
Connect the required cables (see the following
sections for details) and direct all the cables to the
open hole on top.
D
Connect to TV
DVD Home Theatre unit (rear)
VIDEO
OUT
HDMI OUT
Or
HDMI IN
VIDEO IN
If your TV supports HDMI, connect the HDMI cable
from the HDMI OUT socket to the HDMI IN socket
on your TV. Or;
Connect the composite video cable from the VIDEO
OUT socket to the VIDEO IN socket on your TV
(or connect the component video cables to the
corresponding COMPONENT VIDEO
sockets).
Note HDMI connection does not support audio
output from your TV to this unit, a separate audio
connection is required.
E
Connect audio output from TV (for
EasyLink control)
To hear the TV audio through this DVD Home Theatre
unit, connect an audio cable (not supplied) from the
AUDIO IN-AUX1 sockets to the AUDIO OUT sockets
on your TV.
Note To listen to the audio output from this
connection, press AUX/DI /MP3 LINK repeatedly
until 'AUX1 INPUT' is displayed on the display panel.
F
Connect subwoofer and power
cable
FM antenna
Subwoofer (rear)
B
A
TO SUBWOOFER
C
A
Unwind the cables from TO MAIN UNIT on the
subwoofer and connect it to TO SUBWOOFER
socket on this DVD Home Theatre unit.
B
Connect the FM antenna to the inner pin of the FM
75
socket (for some models, it has been
connected in the factory). Extend the wire for
optimum reception.
C
Connect the power cable from subwoofer to the AC
power outlet.
G
Attach table stand to DVD Home
Theatre unit
Align Arrow
Align Arrow
With table Stand
With Table Stand
A
A table stand bracket
A
Close the rear cover.
B
Place the table stand bracket with the arrow
indicators aligned. Then use the protrude panels to
hold the table stand bracket.
Note All the cables must be placed properly inside
the rear panel in order for the rear cover to close.
2
Set up
A
Find the viewing channel
Press 2 to turn on this DVD Home Theatre unit.
A
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT,
button) until
you see the Video In channel.
B
Start Ambisound setup
When you turn on this DVD Home Theatre unit for the
fi rst time, change the Ambisound setup according to
your room environment and setup.
A
In disc mode, press OPTIONS.
B
Press V to select
[ Audio Setup ] in the menu,
then press B.
C
Select [ Ambisound Setup ] in the menu, then press
B.
D
Select a setup you want to change, then press B.
[ Room Acoustics ]
Select the type of walls that surround your room.
The default setting is [ Hard (concrete, wood) ].
[ Room Placement ]
Select the speakers placement position in your room.
The default setting is [ Middle of room ].
[ Speaker Distance ]
Select the distance between two speakers. The
default setting is between 2~3 meters.
[ Listening Position ]
Select the distance between the listening position and
the speakers. The default setting is between 2~3
meters.
E
Press vV to select a setting, then press OK.
F
To exit the menu, press OPTIONS.
Note Refer to the accompanying user manual
for other setup options.
Advertisement
