nella VERSA NBWI-6456 Installation Instruction

Freestanding bathtub

Download this manual

VERSA

NBWI-6456

FREESTANDING BATHTUB INSTALLATION

THANK YOU FOR CHOOSING NELLA™

Welcome to the Nella™ family. We are confident Nella's™ superior quality, design and aesthetic will enhance your bath-

room experience for many years to come. If you have any questions regarding your Nella products please contact your

local sales representative or visit our website www.nellabath.com for customer support and service information.

Thank you again,

NELLA™

PRIOR TO INSTALLATION

Prior to installation please be sure to review all installation instructions with a licensed or qualified plumbing technician

who is familiar with all local plumbing and building codes in your jurisdiction.

PRODUCT FEATURES AND DESCRIPTION

FEATURES

• Solid Surface Soaking bathtub with Overflow

• Free-standing installation

INCLUDED COMPONENTS

• Freestanding bathtub

• Chrome-plated brass and drain assembly

with white sold surface cover

CODES AND STANDARDS

Meets or exceeds:

• IAPMO-ANSI Z124.1

• IAPMO-ANSI Z124.3

• CSA B45.0-CSA B45.4

• cUPC

IMPORTANT - PRIOR TO INSTALLATION

Before you begin please be sure to review the steps below to ensure preferred installation results.

1. Unpack your new NELLA™ product and confirm it is the correct model ordered and inspect the product for damage.

Please keep product in its original packaging until you are ready for installation.

2. Confirm that all walls are plumb and all mounting/installation surfaces are level.

3. Shut of existing water supply.

4. Confirm that your plumbing technician has the proper/recommended tools for proper installation.

USA / Canada: www.nellabath.com

™

Page 1 Before you begin please be sure to review the steps below to ensure preferred installation results. 1. Unpack your new NELLA™ product and confirm it is the correct model ordered and inspect the product for damage. Please keep product in its original packaging until you are ready for installation.
Page 2 If damage or defect is discovered DO NOT INSTALL your Nella product. Any claimed damage or defect to the finish of the product after the product has been installed will be excluded from any manufacturer warranty.
Page 3: Rough-In Dimensions
™ VERSA NBWI-6456 FREESTANDING BATHTUB INSTALLATION Tape Measure Pencil Ruler Square Level Pipe Wrench Channel Locks Scroll Saw Adjustable Wrench Pipe Clamp Pipe Cutter Hacksaw Plumber’s Putty or Putty Knife Caulking Drill Philips Flathead Screwdriver Screwdriver ROUGH-IN DIMENSIONS USA / Canada: www.nellabath.com...
Page 4 VERSA NBWI-6456 WASTE AND OVERFLOW ROUGH-IN Nella freestanding bathtubs do not use cable or trip lever 5. Be sure the bathtub rests on the finished floor in systems to operate the drain stopper. Each bath tub uses a level position.
Page 5 ™ VERSA NBWI-6456 WASTE AND OVERFLOW ROUGH-IN 8. Assemble the female part of your expansion joint and gently rest the bathtub on the finished floor. to the P-trap. **IMPORTANT** - Be sure the expansion joint is flush and level with the finished floor. Female expansion Finished foor flush with finish floor...