Sonos Sub Product Manual

Hide thumbs Also See for Sub:

Download this manual

Sub

The Sonos Sub takes your audio experience to the next level—



Instantly adds a dimension of deep bass impact to your audio listening experience.



Allows placement anywhere because it's wireless and compact—position it vertically or horizontally on

any floor surface.



The top of the acoustic slot doubles as a handle so you can lift it.



See

Getting started

Note:The Sonos Sub is designed for use with any Sonos speaker, except Sonos Connect. Make sure you set up at

least one speaker before adding the Sub.

Controls and lights

Join button

Status light

Product Guide

when you're ready to add a Sub to your Sonos system.

Press to connect during setup.

Indicates the status. For more information, see

https://faq.sonos.com/led.

Page 1 Getting started when you’re ready to add a Sub to your Sonos system. Note:The Sonos Sub is designed for use with any Sonos speaker, except Sonos Connect. Make sure you set up at least one speaker before adding the Sub.
Page 2 If you place the Sub horizontally on the floor, don’t put anything on top of  The Sub is designed to sit on the floor. You can place it in a corner, against the wall, behind, under, or next to any piece of furniture on any kind of floor surface.
Page 3 5. Attach the other 3 felt feet the same way. Connect the cables Attach the power cord and plug in the Sub. Be sure to push the power cord firmly into the Sub until it is flush with the surface.
Page 4 If you don’t have the app, download it from the app store. You’ll use it to set up and control your Sonos system. Getting started. Make sure you set up at least one speaker before adding the Sub. Note:After the Sub is paired with a Sonos speaker, you won’t see it displayed separately in Rooms. Any changes you make to that Sonos speaker (volume, mute, music selection) will also affect the Sub.
Page 5 You can easily pair Sub with a different Sonos speaker (any except the Sonos Connect). If you are moving Sub to a new room, wait for the status light to stop flashing after you plug it back in. 1. Select >...