Handlebar Control Unit; Control Buttons; Turning The System On; Setting The Assistance - Batavus E-go RemovE Manual

______________________________________________________________________

3.2 Handlebar control unit

3.2.1 Control buttons

A System on/off
B Assistance level adjustment
C Assistance level adjustment
D Light on/off
E Mode selector

3.2.2 Turning the system on

You can turn the assistance on and off by keeping button 'A' depressed. You can do this at
any time, also while cycling.
The system switches off automatically if it is not used for more than 10 minutes.

3.2.3 Setting the assistance

Programmes
Eco Low-level
assistance
Speed High-
level assistance
Both the cycling programme and the assistance level can be readjusted at any
time, even while cycling. Both are shown on the right side of the display.

3.2.4 Speed readout

The cycling speed is shown in the middle of the display.
_________________________________________________________________________
31
Select Assistance level
programme
Keep button Three power levels.
'B' or 'C' Assistance provided up to a
depressed maximum of 25 km/h
Keep button Six limited speeds
'B' or 'C' S1 = max. 14 km/h
S2 = max. 16 km/h
depressed
S3 = max. 18 km/h
S4 = max. 20 km/h
S5 = max. 23 km/h
S6 = max. 25 km/h
10
E
D
C
A
B
Select assistance
level
Button 'C' = more
Button 'B' = less
Button 'C' = more
Button 'B' = less