Table of Contents
Advertisement
Programming disc tracks (not for
Picture CD/MP3)
You can play the contents of the disc in
the order you want by programming the
playing order of the tracks. Up to 20
tracks can be stored.
1
Press PROG on the remote.
OR
In 'General Setup Page', use 34 keys to
highlight { Program }, then press 2 to
select { Input Menu }.
2
Press OK to confirm.
2
Exit
To programme your favourite tracks/
chapter
3
Use the numeric keypad (0-9) to enter
a valid track/chapter number.
4
Use 1 2 3 4 keys to move the cursor to
the next position.
➜
If the total programme tracks are
more than ten, press T to open the
next page and proceed with programming
or,
➜
Use 1 2 3 4 keys to highlight
{ Next } on the programme menu, then
press OK.
5
3
4
Repeat steps
~
track/chapter number.
TIPS:
The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP.
DVD Setup Menu Options
6
7
8
9
10
Start
Next
to input another
If you want to remove a track
6
Use 1 2 3 4 keys to move the cursor to
the track you want to remove.
7
Press OK to remove this track from the
programme menu.
To start programme playback
8
Use 1 2 3 4 keys to highlight { Start }
on the programme menu, then press OK.
➜
Playback will start with the selected
tracks under the programmed sequence.
To exit programme playback
9
Use 1 2 3 4 keys to highlight { Exit } on
the programme menu, then press OK.
OSD Language
This menu contains various language
options for the language displayed on the
screen. For details, see page 18.
(continued)
29
Advertisement
Table of Contents
