General Safety Information; Work Area Safety; Personal Safety; Tool Use And Care - RIDGID 1450 Operator's Manual

1450 Pressure Testing Pump

General Safety Information

WARNING! Read and understand all instructions. Know
the location and functions of all controls be-
fore using pump. Learn the applications and
limitations of all controls before using pump.
Failure to follow all instructions listed below
may result in electric shock, fire, and/or seri-
ous personal injury.
SAVE THESE INSTRUCTIONS!

Work Area Safety

• Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
• Keep bystanders, children, and visitors away while
operating the pump. Distractions can cause you to
lose control.
• Keep floors dry and free of slippery materials.
Such preventative measures reduce the risk of injury.

Personal Safety

• Dress properly. Do not wear loose clothing or jew-
elry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
• Use safety equipment. Always wear eye protec-
tion. Dust mask, non-skid safety shoes, hard hat, or
hearing protection must be used for appropriate con-
ditions.
• Do not over-reach. Keep proper footing and bal-
ance at all times. Proper footing and balance enables
better control of the tool in unexpected situations.

Tool Use and Care

• Do not force tool. Use the correct tool for your
application. The correct tool will do the job better and
safer at the rate for which it is designed.
• Store idle tools out of the reach of children and
other untrained persons. Tools are dangerous in
the hands of untrained users.
• Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that
may affect the tool's operation. If damaged, have
the tool serviced before using. Many accidents are
caused by poorly maintained tools.
• Use only accessories that are recommended by the
manufacturer for your model. Accessories that may
be suitable for one tool may become hazardous when
used on another tool.
2
• Keep handles dry and clean; free from oil and
grease. Allows for better control of the tool.

Specific Safety Information

The Operator's Manual contains specific safety infor-
mation and instructions for your protection against serious
injuries including:
• Eye injuries - being blinded by fluid.
Read and follow safety labels on machine!
Know the location and functions
of all controls before using this tool.

Tool Safety

1. Do not pressurize pump above the rated system
pressure. Do not operate above 725 psi (50 bar)
and 120°F (50°C).
2. Pressurize only recommended fluids.
3. Never attempt to grasp a leaky hose under pressure
with your hands. The force of the escaping fluid could
cause injury.
4. A leaking hose should be replaced and never re-
paired.
5. Check for damaged parts before using the pump.
DO NOT use if the hose or any other part is damaged
or broken.
6. Learn the applications and limitations as well as the
specific potential hazards associated with this pump.
As this pump was designed for specific applications,
we strongly recommend that it NOT be modified
and/or used for any application other than for which it
was intended.
7. When servicing, use only identical replacement parts.
Have damaged parts repaired or replaced by an au-
thorized service center.
SAVE THESE INSTRUCTIONS!
Ridge Tool Company