Advertisement
8
9
10
Press the dial to start the
descaling process.
The machine pumps a small
amount of water through the
system. Then it takes about a
5-minute pause, which gives
the Qbo descaling tablets time
to dissolve.
The machine will then pump the
descaling solution through the
system multiple times in 2-minute
intervals.
The descaling process will be
followed by a rinsing phase. This
will rinse all remaining residue
from the descaling tablets out of
the system.
For the rinsing phase:
Remove the MILK MASTER
if you have connected it.
Empty the container.
Empty the water tank and
wash it in warm water with a
mild washing-up liquid. Then
rinse it out with clear water.
Next, fill the water tank with
fresh, clear tap water up to the
max. mark.
11
12
13
14
Slide the water tank back into
the machine as far as
it will go.
If you are using the MILK
MASTER, reconnect it now.
Place a large container (min.
1 liter) under the coffee spout.
Please note that the descaling
process cannot be interrupted!
Press the dial to start the
rinsing cycle.
4/5
Advertisement
