Philips HTS3100/51 Quick Start Manual

1 Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
D
C A
C
B
D
A
Place the centre speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one metre
away from the TV.
C
Place the front speakers at equal disctances from the
TV.
D
Place the rear speakers at normal listening ear level.
B Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A
DVD System (rear)
L
R
C
B
A
Connect the FM antenna to the FM socket. Extend
the wire and fix its end to the wall.
B
Unfold the AM/MW loop antenna and fix the claw
into the slot.
C
Push the tabs and insert the wires into the AM/MW
sockets.
C Connect the speakers and
subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the DVD system.
CENTER
SUB-
WOOFER
REAR REAR FRONT FRONT
LEFT LEFT
RIGHT RIGHT
DVD System (rear)
D Connect the DVD system to TV
Television ( rear)
SCART IN
SCART IN
To off-air
antenna or
set-top box
A
B
DVD System (rear)
A
Use the supplied scart cable to connect the SCART
socket on this DVD system to the SCART IN socket
on your TV.
B
Plug in the power cable from the DVD system to an
AC power outlet.
Note It is important to connect the DVD system
directly to your TV. When watching the TV
programmes, you can press TV on the remote control
to get the sound output from the speakers system.
E
Connect the audio from other
device to DVD system (optional)
Use the red and white audio cables (not supplied) to
connect the AUX IN (R/L) sockets on this DVD system
to the AUDIO output sockets on your Audio/Video
device (for example, DVD recorder, VCR).
AUDIO
OUT
AUDIO OUT
b
DVD System (rear)
Note Press AUX/DI on the remote control to get
the sound output from the speakers system.
Set up
2
A Finding the viewing channel
A
Press STANDBY ON on the DVD system.
B
Press SOURCE on the DVD system until "DISC"
appears on the display panel.
C
Turn on the TV. Use the TV's remote control to
select the correct viewing channel for the DVD
system.
You should see the blue DVD background on the
TV.
Note To search for the correct viewing channel,
press the Channel Down button on the TV's remote
°
control repeatedly (or AV, SELECT, button) until
you see the blue DVD background.
B Select the display language on the
screen
A
Press SETUP.
The { General Setup Page } appears.
General Setup Page
Disc Lock
Display Dim
Program
OSD Language
English
Screen Saver Dansk
DivX(R) VOD Code Deutsch
Espanõl
B
Press to select { OSD Language } and press .
C
Use keys to select a language option in the
menu and press OK to confirm.
D
Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this DVD
system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this DVD system.
Refer to the user manual for more information.