Using Automatic Preset; Tuner Operations; Using Manual Preset; Selecting A Preset Radio Station - Philips HTS3110/12 User Manual

B
Press PLAY until "START ..." appears
on the display panel.
The system will start searching from
the FM band followed by the MW band.
All the available radio stations with
strong signal will be stored automatically.
Once complete, the last tuned radio
station will be played back.

Using automatic preset

Use automatic presetting to store or
reinstall all the preset radio stations.
A
Press TUNER to select "FM" or "MW"
band.
B
Hold down PROGRAM until
"START ..." appears on the display panel.
All previously stored radio stations
will be replaced.

Tuner Operations

A
B
C
D
display panel
A
B
A
B

Using manual preset

Use manual presetting to store your
favourite radio stations.
Tune to your desired radio station (see
'Tuning to radio stations').
Press PROGRAM.
Use ./ > keys to select a preset
number that you want to store the
current radio station.
Press PROGRAM to store.
Selecting a preset radio
station
Press TUNER to select "FM" or "MW"
band.
Use ./ > keys to select a preset
number (or use the numeric keypad on
the remote control).
The waveband, preset number
followed by the radio frequency will
appear on the display panel.
Deleting a preset radio
station
In tuner mode, use ./ > keys to
select a preset radio station.
Hold down Ç until "FM/MW X
DELETED" appears.
"X" is the preset number.
The radio station continues to play
but has been deleted from the preset list.
The rest of the preset radio stations
remain unchanged.
(continued)
37