Philips HTS3090/55 Quick Start Manual

1 Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
C
D A
C
B
D
A
Place the center speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one meter
away from the TV.
C
Place the front speakers at equal disctances from the
TV.
D
Place the rear speakers at normal listening ear level.
B
Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
B
C
DVD System (rear)
A
A
Connect the FM antenna to the FM jack. Extend the
wire and fix its end to the wall.
B
Unfold the AM loop antenna and fix the claw into
the slot.
C
Connect the AM loop antenna to the AM jack. Place
the AM loop antenna on a shelf, or attach it to a
stand or wall.
C Connect the speakers and
subwoofer
Connect the various colored plugs from the speakers
and subwoofer to the same colored jacks at the rear of
the DVD system.
FRONT FRONT FRONT
CENTER
RIGHT LEFT
DVD System (rear)
REAR REAR
LEFT
RIGHT
SUB-
WOOFER
D Connect the DVD system to TV
Television ( rear)
A
DVD System (rear)
B
A
Use the supplied composite video cable to connect
the CVBS jack on this DVD system to the VIDEO IN
jack on your TV.
B
Plug in the power cable from the DVD system to an
AC power outlet.
Note It is important to connect the DVD system
directly to your TV.
E Connect the audio from other
device to DVD system (optional)
Use the red and white audio cables to connect the
AUX IN (R/L) jackts on this DVD system to the AUDIO
output jacks on your Audio/Video device (for example,
DVD recorder, VCR).
AUDIO
OUT
AUDIO OUT
b
DVD System
(rear)
Note Press TV/AUX/DI on the remote control to
get the sound output from the speakers system when
watching the TV program.
Set up
2
A
Finding the viewing channel
A
Press STANDBY ON on the DVD system.
B
Press SOURCE on the DVD system until "DISC"
appears on the display panel.
C
Turn on the TV. Use the TV's remote control to
select the correct viewing channel for the DVD
system.
You should see the blue DVD background on the
TV.
Note To search for the correct viewing channel,
press the Channel Down button on the TV's remote
°
control repeatedly (or AV, SELECT, button) until
you see the blue DVD background.
B Select the display language on the
screen
A
Press SETUP.
The setup menu appears. Use keys on the
remote control to navigate in the menu.
B
Highlight icon and press . Move to in the
menu and press .
C
Move to { MENU LANG } in the menu and press .
D
Use keys to select a language option in the
menu and press OK to confirm.
E
Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this DVD
system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this DVD system.
Refer to the user manual for more information.