Charging The Battery; Pairing Bluetooth Device - RUSTA SKULL Manual

CHARGING THE BATTERY

The device is operated via the integrated lithium polymer battery. Charge the battery as
follows:
1. Plug the micro B USB plug of the charging cable into the USB charging port of the device.
2. Connect the USB connector to the USB port of computer or charging adapter (not included).
3. While charging, the charging level LED indicator will remain illuminated RED.
4. When charging is complete, the charging level LED indicator will turn solid GREEN.
5. Make sure that the USB socket at the port of computer or charging adapter has a
maximum output of 5V DC, 500mAh only.
6. The charging time varies according to battery use.

PAIRING BLUETOOTH DEVICE

• Bluetooth involves a technology for wireless radio connection of devices over a short
distance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480
Ghz in ISM band. Interference can however be caused by WLANs, networks, wireless
telephones, or microwaves ovens, for example, which operate in the same frequency band.
• The device offers you the possibility to use a Bluetooth-enabled device. The functional
radius is limited to approx. 15 meters depending on the surroundings and the unit used.
• If your playing device supports the A2DP profile (Advanced Audio Distribution Profile)
and has a music-player function, then you can also wirelessly transfer music to the
device. The A2DP profile involves a multi-vendor Bluetooth profile. By streaming,
stereo audio signals are wirelessly transferred between the playing device (source)
and the receiving device. To be able to operate the source by remote control, the player
needs to support the AVRCP profile (Audio Video Remote Control Profile).
• Due to different device manufacturers, models, and software versions, a full
functionality cannot be guaranteed.
LOGGING ON DEVICES (PAIRING)
Before you listen to music via the unit, you must pair the devices:
1. Ensure, that the Bluetooth function is activated in your player (Mobile or music player).
For this, please refer to the operation manual of your player.
2. Select the searching mode on your Bluetooth device (refer to your Bluetooth device's
owner's manual for details if necessary.)
3. Turn on the power of the speaker by pressing the On/Off button. The indicator blue
light will start to flash after a short time. The speaker is now set to pairing mode.
4. Your Bluetooth device should find and display "Skull" as a selection, select it
and, if prompted, use "0000" as a pin for pairing code, depending on the device
manufacturers, model, and software version.
5. Verify that you are connected to the speaker. The Bluetooth LED on the speaker will
change to a solid blue and you can hear a signal when pairing is complete.
3