Onset BASE-U-4 Manual

Optic usb base station

Optic USB Base Station

(Part # BASE-U-4)

Inside this package:

• Optic USB Base Station

• Set of couplers:

- For UA Pendant (COUPLER2-A)

- For U20 Water Level (COUPLER2-B)

- For U22 Water Temp Pro v2 (COUPLER2-C)

- For UTBI TidbiT v2 (COUPLER2-D)

- For U23 HOBO Pro v2 (COUPLER2-E)

Doc # 10655-D, MAN-BASE-U-4

Onset Computer Corporation

Overview

The Optic USB Base Station allows communication between the host computer and HOBO

base station uses infrared light to transfer data, which allows loggers to be completely sealed and waterproof. The

Optic USB Base Station converts the USB communication protocol into an infrared protocol used by the optic USB

loggers.

A coupler is required to connect the logger to the base station. Refer to the documentation that came with your

logger for the part number of the correct coupler.

This model of the Optic USB Base Station supports HOBO U-Series loggers with an optic USB interface. Contact

your Onset Authorized dealer or the Onset website (http://www.onsetcomp.com) for more information about

compatible loggers and couplers.

Thank you for purchasing an Onset Optic USB Base Station.

With proper care, it will give you years of reliable service.

optic loggers. The

Table of Contents

Do you have a question about the BASE-U-4 and is the answer not in the manual?

Page 1 Support Loggers This model of the Optic USB Base Station supports HOBO U-Series loggers with an optic USB interface. Contact your Onset Authorized dealer or the Onset website (http://www.onsetcomp.com) for more information about compatible loggers and couplers.
Page 2 The CE Marking identifies this product as complying with the relevant directives in the European Union (EU). © 2009 Onset Computer Corporation. All rights reserved. Onset, HOBO, and HOBOware are registered trademarks of Onset Computer Corporation. Other products and brand names may be trademarks or registered trademarks of their respective owners.